SMB devices Boot Menu

The SMB series has a helpful boot menu shown on console:

DRAM Total size 256MB 16bit width

**** Hit 'Ctrl + C' for boot menu ****

This will show:

Welcome to Gaia Embedded Boot Menu :

1. Start in normal Mode
2. Start in debug Mode
3. Start in maintenance Mode
4. Restore to Factory Defaults (local)
5. Install/Update Image from Network
6. Restart Boot-Loader
7. Run Hardware diagnostics
8. Upload preset configuration file

Please enter your selection (press ENTER to finish) :

• 2. is used to debug hangs on the unit (see sk112858)
• 3. is good for commands like fsck
• 4. will come very handy if the factory default button or USB firmware update do not work
• 5. will load a firmware fw1*.img or u-boot.bin boot-loader file from a BOOTP or tftp server
• 6. will restart the boot loader
• 7. is for future use and without functionality – use CLI show diag instead
• 8. will contact a tftp server and try to load a saved config *.cfg or a dsl*.img

Tags:
smb
smb configuration