sk106162 - Jumbo Hotfix Accumulator for R77.30 (R77_30_jumbo_hf)
Header/footer test page
Solution ID: sk106162
Technical Level:
Basic
Jumbo Hotfix Accumulator for R77.30 (R77_30_jumbo_hf)
ProductMulti-Domain Security Management, Security Gateways, Security Management
VersionR77.30 (EOS)
OSGaia
PlatformAll
Last Modified2023-09-11
Solution
Table of Contents:
Introduction
Availability
- General Availability Take
Important Notes
List of resolved issues in the General Availability Takes
Installation instructions
Uninstall instructions
List of replaced files
Revision History
Introduction
R77.30 Jumbo Hotfix Accumulator is an accumulation of stability and quality fixes resolving multiple issues in different products.
This Incremental Hotfix and this article are periodically updated with new fixes.
The list of resolves issues below describes each resolved issue and provides a Take number, in which the fix was included. A resolved issue is included in the Incremental Hotfix starting from the Take number listed in this table (inclusive). The date, when this take was made available is also listed in the table.
Availability
General Availability Take
Take_351 is the latest General Availability release that can be directly downloaded from Check Point Cloud using CPUSE and from this article:
| | | | |
| --- | --- | --- | --- |
| Take | Date | CPUSE Identifier | CPUSE offline package |
| Take_351 | 06 Oct 2019 | Check_Point_R77_30_JUMBO_HF_1_Bundle_T351_FULL.tgz | (TGZ) |
Note: Effective Oct 6th 2019, General Availability Take_351 is available for CPUSE online installation in Gaia Portal and Gaia Clish (it replaces Take_345).
Notes: 1. For Smart-1 405 / 410 appliances, it is necessary to install Take_266 and higher (refer to sk117578). 2. Effective February 17th 2017, the GA Take_216 is available for CPUSE online installation in Gaia Portal and Gaia Clish (it replaces Take_205). 3. Effective December 15th 2016, the GA Take_205 is available for CPUSE online installation in Gaia Portal and Gaia Clish (it replaces Take_185). 4. Effective November 10th 2016, the GA Take_185 is available for CPUSE online installation in Gaia Portal and Gaia Clish (it replaces Take_159). 5. Effective June 20th 2016, the GA Take_159 is available for CPUSE online installation in Gaia Portal and Gaia Clish (first General Availability Take). 6. For 15000 / 23000 appliances with 40 GbE cards, it is necessary to install Take_162 and higher (refer to sk112517). 7. For 23900 appliances, it is necessary to install Take_327 or Take_331 and higher (refer to sk107516).
Online installation - use CPUSE identifier either in Gaia Portal, or in Gaia Clish.
Offline installation - use CPUSE offline / exported package either in Gaia Portal, or in Gaia Clish.
Important Notes
Users with extended support for R77.30, who are using Client Authentication, and who need to handle the POODLE Bites vulnerability (CVE-2014-3566) ( sk102989), contact Check Point Support to get a Hotfix for this issue.
Refer to sk98028 - Jumbo Hotfix Accumulator FAQ.
This Jumbo Hotfix Accumulator is suitable only for Gaia OS (SecurePlatform / Linux / IPSO / XOS / Windows OS are not supported).
This Jumbo Hotfix Accumulator (starting in Take 189) can be applied to R77.30 instances running in Amazon Web Services (AWS), or in Microsoft Azure.
Refer to sk109141 - Installing the Jumbo Hotfix Accumulator on Security Gateways in Amazon Web Services (AWS) and Microsoft Azure for additional information.
On Security Gateway running in Amazon Web Services (AWS), it is not supported to install Takes 189 and higher of this Jumbo Hotfix Accumulator when the user's shell is configured to /etc/cli.sh (the default shell).
- Before installing Takes 189 and higher, the user's shell must be changed to any shell other than
/etc/cli.sh- e.g.,/bin/bash,/bin/csh,/bin/tcsh(refer to R77 versions Gaia Administration Guide - chapter "User Management" - section "Users"). - After installing Takes 189 and higher, it is not supported to change the user's shell back to
/etc/cli.sh.
This Jumbo Hotfix Accumulator (all its Takes) is not supported on vSEC for Google Cloud Platform.
Each "Take" of this Jumbo Hotfix Accumulator is always based on latest GA Take of Check Point R77.30.
It is not supported to install this Jumbo Hotfix Accumulator using the ISOmorphic Tool
(do not add this Jumbo Hotfix Accumulator in the "Select hotfixes:" section of the ISOmorphic Tool).
It is recommended to install Jumbo Hotfix Accumulator on all the R77.30 machines in the environment - Security Gateways / Management Servers / etc. running on Gaia OS.
This Jumbo Hotfix Accumulator is suitable for these products and configurations:
- Security Gateway
- Cluster
- VSX
- Security Management Server
- Multi-Domain Security Management Server
- Standalone machine (Gateway + Management)
- Endpoint Security Server
- Log Server
- SmartEvent Server
- SmartReporter Server
There is no conflict between this Jumbo Hotfix Accumulator and the R77.30 Add-On. These two packages can be installed in parallel without any issues on R77.30 Security Management Server / Multi-Domain Security Management Server / Log Server / Endpoint Security Management Server / Endpoint Security Policy Server.
Starting in Take_266, this Jumbo Hotfix Accumulator supports TLS 1.2 in the following products / features:
ICA Management Portal / Management Portal
- Secure Internal Communication (SIC), except the SIC initialization that communicates over SSLv3
- Gaia Portal
- Platform Portal
- Software Updates
- Mobile Access blade
- Endpoint Security Management Server
- SSL Network Extender (SNX)
Notes:
For Threat Emulation customers that do not allow automatic updates from the Check Point Cloud, it is important to update the Threat Emulation Engine according to sk92509 - Offline updates for Threat Emulation images and engine.
To get an improved SmartConsole that supports TLS 1.2, refer to sk107166.
For Smart-1 405 / 410 appliances, it is necessary to install Take_266 and higher (refer to sk117578).
For 15000 / 23000 appliances with 40 GbE cards, it is necessary to install Take_162 and higher (refer to sk112517).
On 21000 appliances with SAM card, due to specific stability issues, Take 210, Take 213 and Take 216 should not be installed. Refer to sk116070.
This Jumbo Hotfix Accumulator has to be installed only after successful completion of Gaia First Time Configuration Wizard and reboot.
List of resolved issues in the General Availability Takes
Enter the string to filter this table:
| ID | Product | Description |
| Take 351 (06 Oct 2019) - General Availability Take | ||
| PRJ-2376, PRJ-2358 |
Gaia OS | CVE-2019-11477, CVE-2019-11478 & CVE-2019-11479: TCP SACK PANIC - Linux Kernel vulnerabilities. Refer to sk156192. |
| PRJ-1330, 02541089 |
SecureXL | Resolved issue in multicast routing lookup. |
| PMTR-27365, IDA-1609 |
Identity Awareness | In some scenarios, the Identity Agent fails to authenticate using Kerberos SSO due to very large Kerberos ticket, and the agent fallsback to User/Password authentication. Refer to sk145832. |
| PRJ-366, PMTR-33177 |
Identity Awareness | In some scenarios, when using Load Sharing, upon the same IP address used by two different users, users may be able to access or to be restricted from accessing resources without proper roles. |
| Take 348 (24 Apr 2019) CPUSE Identifier: Check_Point_R77_30_JUMBO_HF_1_Bundle_T348_FULL.tgz |
||
| IDA-1689, PMTR-31034 |
Identity Awareness | Removed unnecessary identity update, during Identity Agent or Terminal Server Agent IP address change, that results in corruption of PEP database. |
| GAIA-3010, PMTR-23157 |
Gaia OS | CVE-2018-15473: Username enumeration is possible due to a premature bail-out while dealing with a malformed packet. The issue exists in several authentication protocols. |
| IDA-1225, PMTR-33364 |
Identity Awareness | Fixed possible session corruption on PDP side that could lead to unexpected behavior. |
| Take 347 (27 Mar 2019) CPUSE Identifier: Check_Point_R77_30_JUMBO_HF_1_Bundle_T347_FULL.tgz |
||
| PMTR-26171, PMTR-26174 |
SSL Inspection | Changed SSL Network Extender on MacOS to 64-bit architecture to support 32 bit apps depreciation in OSX. |
| PMTR-35032, PRJ-99 |
VPN | Important security update for IPSec Site-to-Site (S2S) VPN. |
| Take 346 (13 Feb 2019) CPUSE Identifier: Check_Point_R77_30_JUMBO_HF_1_Bundle_T346_FULL.tgz |
||
| 02468036 | UserCheck | Improved stability when Push Notifications are enabled on Mobile Access blade. |
| 02657434 | VPN | Improved connectivity with 3rd party VPN peers using IKEv2. Refer to sk120835 |
| 02100804 | VPN | After Cluster failover, VPN tunnel is down and "Unknown SPI for IPsec packet" log is shown. Refer to sk112339. |
| PRHF-608 | SecureXL | Improved stability of VSX gateway when under heavy load when SecureXL is enabled. |
| JPMC-284 | SecureXL | Improved stability of SAM card when running multicast jumbo traffic packets. |
| JPMC-316 | SecureXL | Improved stability of SAM card when PIM is configured in Sparse Mode on its interfaces. |
| Take 345 (25 Feb 2019) - General Availability Take | ||
| PMTR-19734 | IPS Blade | Legitimate EDNS queries are dropped with "Non Compliant DNS - Bad Resource Record format, Illegal EDNS0 RR" log. Refer to sk112578. |
| PMTR-26587 | Identity Awareness | On some occasions, Terminal Server users are not enforced by the correct access role. |
| Take 344 (10 Jan 2019) CPUSE Identifier: Check_Point_R77_30_JUMBO_HF_1_Bundle_T344_FULL.tgz |
||
| PMTR-24897 | VoIP | H323 - Connection might fail when Gatekeeper initiate the call to endpoint. |
| PMTR-18093, PMTR-11941, PMTR-13827, 02482488 |
CoreXL | CoreXL FW instance offloads a partial/anticipated connection that already exists. Refer to Scenario 5 in sk100467. |
| PMTR-27889 | Threat Extraction | When /tmp/scrub folder has large amount of files (over 5000) it won't be cleaned. |
| PMTR-23309 | Security Gateway | In some MGCP clients - Source port changes even when MGCP protocol is disabled which cause MGCP traffic to not reach its destination properly. |
| PMTR-20131 | SecureXL | Connectivity issues with following drops: 'handle_outbound_pac, Reason: connection not found' - Refer to sk101134, Scenario 2 |
| PMTR-24938 | VoIP | SIP packets that contain * in the 'contact' field are being dropped. |
| PMTR-26139 | SSL Inspection | HTTPS inspection added support to custom extension used by Apple. |
| PMTR-22966 | SSL Inspection | HTTPS categorization: add support for certificates up to 16KB in size. |
| PMTR-26020 | Web Intelligence | In rare cases, XFF header obfuscation may not work when HTTPs Inspection is enabled. |
| Take 343 (17 Dec 2018) CPUSE Identifier: Check_Point_R77_30_JUMBO_HF_1_Bundle_T343_FULL.tgz |
||
| PMTR-22951, 02490101 |
VPN | ikeV2 stability improvement with 3rd party peers. |
| PMTR-18922, PMTR-24797 |
VPN | Certificate validation: In compliance with RFC 2560 - added support for empty 'nextUpdate' fields in OCSP response. |
| PMTR-23443, 02757621 |
Endpoint Security | "Cannot create certificate" error message, when cannot enroll user certificate on Endpoint Security VPN client after January 24th 2018. Refer to sk122874. |
| PMTR-23326, PRHF-1352 |
Gaia OS | "set fcd revert" command fails, between Take 309 and 343 of Jumbo Hotfix Accumulator for R77.30 |
| PMTR-19536 CLUS-1073 |
ClusterXL | Improved Cluster stability during policy installation, reduced interface flapping events and high CPU load on the Cluster Gateways. Refer to sk133372 |
| Take 342 (26 Dec 2018) - General Availability Take | ||
| PMTR-19062, 02305365 |
SecureXL | In rare cases, in SIP implementations, call might disconnect after a few minutes. Refer to sk112913 |
| PMTR-17227, UP-225 |
Security Gateway | Fixed SAM rules corruption after reboot. |
| PMTR-19771, 02645755 |
Security Gateway, CoreXL |
SecureXL forwards non-accelerated packets to the gateway causing it to crash. |
| PMTR-15680, 02508263 |
SecureXL | Connectivity issue during policy installation, when NAT templates are enabled between CPUs. |
| PMTR-15586, PMTR-10842 |
SecureXL | Reduce/eliminate drops on interface during install policy with high load traffic. |
| PMTR-22572, PMTR-3899 |
HW Accelerator | Additional fixes to resolve crashes for certain conditions with logs indicating "ADP Slot hung." |
| PMTR-19551, 02694599 |
Gaia OS | Output of "show message motd" clish command is corrupted if the "motd" message is too long. Refer to sk122199. |
| PMTR-22724, 02059238 |
VPN | Improved VPN connectivity when using Diffie Hellman groups 19 or 20 with 3rd parties. Refer to sk112156 |
| PMTR-17522, SWG-1078 |
DLP | Memory leaks when HTTPS Inspection and Probe Bypass are enabled. |
| PMTR-19863, 01619775 |
Security Gateway | Policy installation failure when number of SAM rules is higher than 25000. Refer to sk110560 |
| 02763128 | Web Intelligence | Enhanced HTTP parser to distinguish between malformed HTTP traffic and valid HTTP traffic that is not RFC compliant, but exists in the real world. |
| Take 339 (31 Oct 2018) | ||
| 02669997 | Hardware | Improved forensic data collection for SAM stability. |
| 02366690 | Gaia OS | Improved stability of CPD process on Multi Domain Server, during hardware sensor reading. Refer to sk114936. |
| 02413299 | VoIP | CPU peaks may be experienced when using H323 (VoIP protocol). |
| IDA-648 | Identity Awareness | Improved pdpd stability with AD Query in specific manual configuration overriding per gateway for Account Unit. |
| 02708339 | VPN | Improved IKEv2 compatibility in clustered CloudGuard Azure environments. Refer to sk123374. |
| 02436860 | Content Awareness | Improved DLP NCR encoding support. |
| Take 338 (20 Sep 2018) - General Availability Take | ||
| 02481671 | Threat Extraction | When Threat Extraction is configured to block access to original files and to block corrupted/encrypted files (both not default) - The email that indicates that the encrypted/corrupted file has been removed is not received by email recipient. |
| 01850251 | Anti-Malware | UDP performance with Threat Prevention was improved. |
| SA-31 | Gaia OS | Fixing an issue which can lead to the loss of connectivity. |
| 02421166, 02482081, 02468381 |
VPN | Added Azure VPN IKEv2 enhancement. Refer to sk116157. |
| 02431088 | VPN | Stability improvements for IKEv2 and Azure gateways. |
| 02058553 | VPN | IKEv2 support for more than 8 proposals. |
| 02471564 | SSL Inspection | Improved stability of WSTLSD daemon. |
| IDA-949 | Identity Awareness | RADIUS accounting server does not understand accounting-response from Check Point gateway. Refer to sk130532. |
| 01786753 | Identity Awareness | AD users with special characters in their names cannot authenticate. Refer to sk131872. |
| 01500409 | Identity Awareness | " Group membership of the required account (user or machine) could not be retrieved from the AD. Make sure the account exists in the AD." log is received from Identity Awareness blade when format of RADIUS user is " user@domain". Refer to scenario 6 in sk106133. |
| IDA-1150 | Identity Awareness | Fixed a MUH Agent issue of sending unnecessary MUH updates causing high CPU on PEP. This lead to delays with getting identities and can cause connectivity issues. |
| IDA-735 | Identity Awareness | Identities are not synced to PEP if two PDPs will report the same network Refer to sk130373. |
| Take 336 (21 Aug 2018) | ||
| PMTR-20184 | Security Gateway | Check Point response to SegmentSmack (CVE-2018-5390) & FragmentSmack (CVE-2018-5391). Refer to sk134253. |
| PMTR-20189 & PMTR-20188 |
UserCheck, VSX |
In VSX environment portals are down after uninstalling R77.30 Jumbo Hotfix take 266 or later and there are multiple defunc instances of mpdaemon. |
| 02729238 | SSL Inspection | Improved accuracy of HTTPS Inspection rule-base matching. |
| 01699431 | Mobile Access | Improving stability of SNX roaming feature. |
| 02408359 | QoS | VPN Stability improvements in setups with NAT. |
| PMTR-19603 | Gaia | Jumbo Hotfix uninstall causes issues in boot and communication in TEX product line. |
| 01855951 | VPN | Improved stability for VPN Remote Access when using tcpt. |
| Take 331 (26 Jul 2018) | ||
| GAIA-2269 | Data Center Security Appliances | Added support for 23900 appliances. Refer to sk107516. |
| 02396869 | VPN | Improved tunnel stability in site to site setups. |
| 02447010 | VPN | "You cannot receive an office Mode IP address because the security gateway does not have a license for Office mode" error on SSL Remote Access VPN client (SNX client / Capsule VPN client / Capsule Connect client / Endpoint Connect client) that tries to connect to a Cluster in High Availability mode. Refer to sk120652 |
| Take 329 (10 Jul 2018) – Not supported on 23900 appliances | ||
| 02006858 | VPN | Improving consistency and stability of supernet encryption domains of gateways with Mobile Access blade. |
| PMTR-14587 | Gaia OS | Security hardening for Gaia WebUI |
| PMTR-14615 | Gaia OS | Security hardening for Gaia WebUI |
| PMTR-14614 | Gaia OS | Security hardening for Gaia WebUI |
| 01944349 | Gaia OS | When browsing to the Time page in the GAIA WebUI, two messages are spammed in /var/log/ messages (flag is ... and data is...). |
| 02049361 | Gaia OS | Intel X520 DP 10Gb DA/SFP+ Server Adapter is not detected by GAIA OS. |
| 01876093 | Mobile Access | Adding configurable option to allow compressed https connections to internal servers. Refer to sk128513 |
| PMTR-15763 | Gaia OS | Gaia Portal shows blank page after login with Firefox 5x or Chrome 66. Refer to sk121373. |
| THREATEMUL-4272 | Threat Emulation | If Threat Emulation disk space threshold is higher than Log disk space threshold, then Threat Emulation will stop emulation while the logs will continue to accumulate, resulting in the emulation entering fail open. |
| Take 327 (26 Jul 2018) – to be installed only on 23900 appliances | ||
| GAIA-2269 | Data Center Security Appliances | Added support for 23900 appliances. Refer to sk107516. |
| Take 322 (18 Jun 2018) | ||
| 02725585 | Mobile Access | CVPN daemon stability. |
| Take 320 (11 Jun 2018) | ||
| 02764970 | Gaia OS | lspci utility showing unknown devices on HP G9 server with 4TH gen Xeon CPU's. |
| 02764972 | Gaia OS | Fixed the output of raid_diagnostics command. |
| PMTR-9275 | Security Gateway | In rare scenarios, CPD process stops working when running for a long time. |
| 02757263 | SSL Inspection | Improved resumption handshake behavior in SSL inspection. |
| 02757276 | SSL Inspection | Improved handshake handling in case of re-negotiation. |
| CPDIAG-936 | Check Point Diagnostic tool | - New cpview capability to collect and present IO data. - Enabled cpview history collection on Management machines |
| Take 317 (27 Jun 2018) - General Availability Take | ||
| 02734847 | Web Intelligence | Improved non-compliant HTTP handling. |
| 02365162 | Multi-Domain Security Management Server | When using the Compliance blade with Management HA, FWM might consume high CPU. |
| Take 315 (26 Apr 2018) | ||
| 02329735 | Check Point Appliances | Customers using 40Gbe Cards with firmware version 12.12.3072 might experience unexpected behavior while using port beacon ( ethtool –p) and RMA diagnostics tool. Contact Check Point Support for a new firmware version. |
| 02718182 | SSL Inspection | Improved handling of trusted CAs certificates when HTTPS inspection is enabled. Refer to sk122973. |
| 02420344 | vSEC VE Security Gateway | vSEC Virtual Edition (running on Azure, AWS, GCP, KVM, Hyper-V) 'too many internal hosts' error in /var/log/messages on Security Gateway. Fix for identifying only VMware platform as vSEC Virtual Edition. |
| Take 311 (4 Apr 2018) | ||
| IDA-650 | UserCheck | When users try to access an non-existing page in the portal it will redirected to the base home page instead of getting an HTTP 404 response. |
| 01678514 | DLP | Improved connectivity of DLP and FTPS. |
| Take 310 (14 Mar 2018) | ||
| 02694299 | Cluster | Deleting last backup IP address from VRRP Interface triggers a transition from master state to backup. |
| 02722259, MCFG-101 |
Identity Awareness | Captive Portal Kerberos SSO redirection does not work in VSX in new installed VS. Note: This fix is relevant for any Take of R77.30 Jumbo Hotfix Accumulator between Take 266 and Take 309 (inclusive). |
| 02693681 | Gaia OS | fwm logexport -f command does not properly export some fields from the log file to an ASCII file. |
| Take 309 (26 Feb 2018) | ||
| GAIA-1737 | Gaia OS | Security hardening for Gaia Clish |
| Take 308 (19 Feb 2018) | ||
| THREATEMUL-1861 | Threat Emulation | Integrated Threat Emulation forensics report update capability. For more details, refer to sk120357 |
| 02685256 | Threat Emulation | Fixed an issue causing Gaia backup size to increase significantly when using Threat Emulation. |
| IDA-621 (Giraffe) | Identity Awareness | Identity Awareness Feature Pack (including Identity Collector support) scale and quality enhancements. For more details, refer to sk120979. |
| 02449938 | SecureXL | SAM enabled interfaces have a maximum MTU of 3950 bytes. |
| Take 302 (27 Mar 2018) - General Availability Take | ||
| 02660171 | SecureXL | In a very rare scenario, interface state could change midway through handling of fragmented packet causing SAM to crash. |
| 02701723 | IPS Blade | In rare conditions, following policy installation with an IPS update, some IPS inspected traffic is being dropped, and message logs include messages like: "FW-1 - ips_cmi_handler_match_cb_ex: signature (XXX) does not have a policy" |
| 02703382 | Gaia OS | In some cases, "missing state" is erroneously displayed when checking the disk's status via raid_diagnostic, cpstat and snmpwalk commands. |
| PMTR-4786 | DLP | Stability improvement of dlpu process when DLP blade is enabled. |
| IDA-636 | DLP, User Check | Stability improvement of fwucd process during process exit. |
| 02669195 | Multi-Domain Security Management Server | Upon MDS startup in large MDM environments, the fwm process may consume high CPU resources for some time. |
| Take 301 (16 Jan 2018) | ||
| 02704101 | Security Management Server | After installing R77.30 Jumbo HF take 297, CPD\SNMPD cores are found on the machine. |
| 02685526 | Security Gateway | In SmartDashBoard, the "Hits" counter in a specific rule does not increase even though traffic was matched to this rule. Refer to sk115098. |
| 02694079 | VPN | Simplifying MSS clamping configuration. |
| 02694314 | VPN | Improved stability of vpnd daemon. |
| 02528926 | SecureXL | Improved stability while pushing policy after extended longevity of 8 months on SAM enabled gateways. |
| 02693271 | Gaia OS | PIM hello packets dropped in SmartView Tracker. |
| 02445000 | SecureXL | On rare occasions, multiple iterations of multicast join and leave may result in memory leak. |
| Take 297 (18 Dec 2017) This Take is not supported with SNMP Monitoring. |
||
| 01986657 | VPN | cpd stability improvements. |
| 02676734 | VPN | Remote Access users cannot connect when using a certificate issued by subordinate CA. |
| 02689074 | VPN | Prevent defaulting Remote Access TTM Configuration files (such as trac_client_1.ttm) during jumbo installation after installing any Take higher than Take 266 up to Take 294 (inclusive) of R77.30 Jumbo Hotfix Accumulator. |
| 02676736 | VPN | IKE negotiation fails when using certificates from subordinate CAs. |
| 02439945 | VPN | RIM routes not removed when MEP node fails. |
| 02439913 | VPN | RIM routes are not added to the routing table after failover and immediate failback. |
| 02440245 | VPN | VPN stability improvements. |
| 02678619 | VPN, HTTPS Inspection | Improved stability of WSTLSD daemon during CRL validation. |
| 02655364 | Security Gateway | Improved stability when processing VoIP traffic |
| 02661935 | Security Management Server | If there are more than ten thousand Binary Large Objects (BLOBs) on the Log Server, there may be a delay before new logs show in SmartConsole after a policy installation. |
| 02677133 | Security Management Server, Multi-Domain Security Management Server, VSX | Improved stability of CPD process in Multi-Domain server, Security Gateway and VSX Gateway. |
| Take 294 (23 Nov 2017) | ||
| 02110663 | VPN | Tunnel to Azure fails periodically. |
| 02489908 | SSL Inspection | Improved SSL handshake for HTTPS inspection. |
| 02674931 | Identity Awareness | httpd process repeatedly failing during startup. Note: This fix is relevant for any Take of R77.30 Jumbo Hotfix Accumulator between Take 266 and Take 292 (inclusive). For VSX configurations, refer to 02722259 (Take_310 ) |
| 02575864 | VPN | IKEv2 - response not send if failed to decode request message. |
| 02455007 | Data Center Security Appliances | On rare occasions (with a very large uptime of more than 250 days), traffic can be dropped after policy installation because a SecureXL template is deleted prematurely from FireWall kernel. Refer to sk119999 |
| 02449938 | Check Point Appliances | For SAM enabled interfaces, jumbo frames beyond 4k size may cause instability. Hence, for SAM enabled interfaces, the max MTU is limited to 3950. |
| 02478098 | UserCheck | UserCheck is not presented because the error page was already triggered by another blade in the same session. |
| 02668257 | VSX | When attempting to debug fwk process using the fw debug command, some debugs do not appear correctly. |
| 02658404 | ClusterXL | Traffic interruption on VLAN interfaces during policy installation on ClusterXL Load Sharing Multicast mode. |
| 02489933 | Gaia OS | Output of dmesg command shows "bonding: bond |
| 02564276 | Identity Awareness | After IDA agent sends NACHello request, it receives response with empty portal names. |
| 02582480 | Security Management | Policy installation fails on DAIP gateways after changing Domain Server from Standby to Active. |
| Take 292 (19 Dec 2017) - General Availability Take | ||
| 02563960 | IPS | fwd process or fw_full process on Security Gateway consumes memory at high level after installing Take 206 of R77.30 Jumbo Hotfix Accumulator ( sk117655) |
| 02569432 | Threat Emulation | When Threat Emulation was configured to send some of the files to the cloud and some locally, the files were sent only locally and not to the cloud. In this release, the configuration in the GUI will take effect and files will be sent to emulation according to the policy. |
| 02659361 | ClusterXL | SNMP query returns wrong outputs for haClusterIpTable |
| 02665619 | SNX | In rare cases, client running Windows 10 Anniversary update experiences disconnections within SNX tunnel. |
| 02656968 | Security Gateway | In rare scenarios, when working with Dynamic Objects, NAT rules are not applied anymore after policy installation or update of software blades signatures. This causes traffic outage for all connections that should undergo NAT. |
| 02536207 | VSX | Added: - Ability to query specific Virtual Device directly using the IP address of the Virtual System. - Ability to query SNMP daemons in the contexts of Virtual Devices sent to the IP Address of VSX Gateway itself using SNMPv1, SNMPv2 and SNMPv3. - New OIDs in the SNMP VSX tree: - Memory usage for each Virtual System. CPU usage for each Virtual System for each core. |
| 02659849 | VoIP | Data connections of H323 protocol were not opened correctly in VSX cluster environments. |
| 02660349 | DLP, Threat Extraction | Security enhancements for Data Loss Prevention and Threat Extraction blades |
| 02659678 | Threat Emulation | Links inside email with Domain suffix (e.g. www.example.com) were emulated as com files. |
| 02661043 | SmartLog | Improved stability of "smartlog_server" process when running queries in SmartLog GUI to several Log Servers.Refer to sk112826. Note: This fix is relevant for any Take of R77.30 Jumbo Hotfix Accumulator between Take 198 and Take 286 including. |
| 02655985 | SmartLog | Improved stability of "smartlog_server" process when activating the "Auto Refresh" button in SmartLog GUI (upper right corner) for several hours. |
| 02555984 | Security Gateway, Security Management Server, Multi-Domain Security Management Server | Improved memory consumption by FW process and FWD process. Refer to sk117655. Note: This fix is relevant for any Take of R77.30 Jumbo Hotfix Accumulator between Take 206 and Take 286 including. |
| 02590882 | SmartEvent | New events are not created in SmartEvent GUI, and "ERROR: duplicate key value violates unique constraint "seam_event_XXX_pkey"" in $RTDIR/log/cpsemd.elg file.Refer to sk105185. |
| 02532160 | SecureXL | For 21000 appliances with SAM card, improved stability of SAM card when running the "cpstop -fwflag -driver" command as a part of kernel memory leak detection procedure.Refer to sk35496. |
| 02401494 | VoIP | Improved check for memory allocation failures under heavy load of VoIP traffic. |
| 02573235 | VSX | Improved support for Connectivity Upgrade (CU) in VSX VSLS. Note: This fix is relevant for any Take of R77.30 Jumbo Hotfix Accumulator between Take 198 and Take 286 including. |
| Take 286 (13 Sep 2017) | ||
| 02646492 | Gaia OS | In very rare cases, Gaia Portal is not accessible after installing any Take higher than Take 226 up to Take 282 (including) of R77.30 Jumbo Hotfix Accumulator. |
| Take 282 (24 Aug 2017) | ||
| 02562476 | Threat Emulation | Mail Transfer Agent does not process e-mails queued prior to installation/upgrade/uninstall of Jumbo Hotfix Accumulator. Relevant only to Takes 221, 225, 226, 266, 272, and 280. Refer to sk119515. |
| 02567302 | HTTPS Inspection | HTTPS Inspection fails occasionally during CRL validation failure. |
| Take 280 (16 Aug 2017) | ||
| 02498183 | HTTPS Inspection, Security Management Server, Multi-Domain Security Management Server | Applications, Dynamic objects and Domain objects are available for use in the HTTPS Inspection policy, but these objects are not enforced on the Security Gateway. Refer to sk119276. |
| 02498239 | Threat Prevention, Security Management Server, Multi-Domain Security Management Server | Domain objects are available in the Threat Prevention policy in the following columns: Source, Destination and Scope, although they are not supported in the Threat Prevention policy. |
| 02557325 | Threat Extraction, DLP | Security enhancements for Threat Extraction and Data Loss Prevention blades. |
| 02570146 | HTTPS Inspection, Security Gateway | Improved stability of Security Gateway when HTTPS Inspection is enabled and/or Security Gateway is configured as Proxy (this issue is relevant only to Take 272 of R77.30 Jumbo Hotfix Accumulator). |
| 02561565 | Anti-Virus, Anti-Bot, URL Filtering | Improved URL recognition mechanism for Anti-Virus, Anti-Bot, and URL Filtering blades. |
| 02548031 | Client Authentication Portal | Security hardening for Client Authentication Portal. |
| 02040869 | VSX | " kernel: VRF ERROR: Illegal parameters during call to sock_setsockopt() @ net/core/sock.c: Refer to sk111101. |
| 02552177 | Gaia OS | SNMP Query for the following OID trees does not return the expected information ( snmpwalk command returns "No Such Instance currently exists at this OID"):- 1.3.6.1.4.1.2620.1.24 (.iso.org.dod.internet.private.enterprises.checkpoint.products.avi) - 1.3.6.1.4.1.2620.1.29 (.iso.org.dod.internet.private.enterprises.checkpoint.products.uf) - 1.3.6.1.4.1.2620.1.30 (.iso.org.dod.internet.private.enterprises.checkpoint.products.ms) Note: Issue occurs only in Take 221, 225, 226, 266, and 272. |
| - | Endpoint Security Server | Added support for Endpoint Security Server R77.30.03. Refer to sk119893. |
| Take 272 (26 July 2017) | ||
| 02552331 | IPS, Application Control, URL Filtering, Anti-Virus, Anti-Bot, Threat Emulation, DLP | A "malformed protocol name in request" log is seen in SmartView Tracker / SmartLog for HTTP traffic. HTTP traffic that contains "HEAD" request is mistakenly identified as non-compliant HTTP traffic by the HTTP parser. As a result, the connection is rejected/bypassed either according to the non-compliant HTTP settings, or according to the "Fail Open"/"Fail Close" settings. |
| 01778991, 02443602; 02453169 |
HTTPS Inspection | Improved stability of HTTPS Inspection with enabled Probe Bypass. Refer to sk111600. |
| 02538223 | URL Filtering | Improved URL recognition mechanism for Anti-Virus, Anti-Bot, and URL Filtering blades. |
| 02459918 | Anti-Virus | Improved inspection of "Unknown" file types according to the Threat Prevention policy (when the option "Process specific file types families" is selected in the Threat Prevention profile - "Anti-Virus Settings"). |
| 02524486 | Security Gateway | CIFS traffic is dropped on certain CIFS requests. |
| 02519295, 02519439 | VPN | Improved stability of VPND process in IKEv2 flows. |
| 02537316 | VSX, SmartView Monitor | Virtual Switches in VSX cluster are shown in "PROBLEM" status in SmartView Monitor without any error message. Refer to sk112067. |
| Take 266 (03 July 2017) This Take is not supported on Cluster High Availability configured in Bridge mode. |
||
| - | Gaia, Security Gateway, Management Server, etc. | Support for TLS 1.2 Refer to sk107166. Note: For Threat Emulation customers that do not allow automatic updates from the Check Point Cloud, it is important to update the Threat Emulation Engine according to sk92509 - Offline updates for Threat Emulation images and engine. |
| - | VPN | Support for Online Certificate Status Protocol (OCSP): The Security Gateway now validates the certificate from the server (on the Internet) using the OCSP standard, which is faster and uses much less memory than CRL Validation.. |
| - | Mobile Access | Support for Mobile Access Reverse Proxy. Refer to sk110348. |
| - | Mobile Access | Support for Capsule Workspace App Wrapping. Refer to sk111558. |
| 02517569 | Mobile Access | Improved stability of Mobile Access WebMail application. |
| 02531747 | Check Point Appliances | Added support for Smart-1 405 and 410 appliances. Refer to sk117578. |
| 02514370; 02429601 |
Threat Emulation | Large files downloaded over HTTP are not inspected by Threat Emulation blade if they are encoded with "gzip". |
| 02517497 | DLP | DLP supports Microsoft Office only from versions lower than 2016 (this issue is relevant only to R77.30 Jumbo Hotfix Accumulator). |
| 02508656 | SSL Network Extender, Endpoint Security On Demand, SecureWorkspace | Unable to connect with SNX, ESOD and SWS after updating the Java to version 8 update 131. The SNX connection remains at ' initializing' state. |
| 02497785, 02510894 | HTTPS Inspection | Improved stability of WSTLSD daemon by removing Issue ID 02439917 ( sk109096) that was added in Take 210 (this issue is relevant only to R77.30 Jumbo Hotfix Accumulator - Takes 210, 213, 216, and 225). |
| 02498309 | HTTPS Inspection | Connection to an HTTPS web site can get stuck in the following scenario: 1. HTTPS Inspection is enabled on Security Gateway 2. "Website categorization mode" is set to "Hold" (in R77X SmartDashboard, go to the "Application & URL Filtering" tab - expand the "Advanced" - click on the "Engine Settings") 3. The HTTPS web site's category is not in RAD daemon's cache yet (i.e., categorization of this HTTPS web site will require a "Hold") Refer to sk119273. |
| Take 226 (14 June 2017) | ||
| 02516659, 02521220 | Threat Emulation, Threat Extraction | Fixed Mail Transfer Agent (MTA) enforcement issue. |
| 02513169 | Threat Emulation, Threat Extraction | Security Gateway configured as MTA does not forward e-mails / forward e-mails very slowly that contain attachments in the TNEF format. Refer to sk117312. |
| Take 225 (22 Mar 2017) | ||
| 02486948 | Security Gateway, SmartView Monitor | SmartView Monitor incorrectly shows R77.30 Security Gateway as "Disconnected" and its software blades as "not responding". This cosmetic issue appears only after installing Take_221 of R77.30 Jumbo Hotfix Accumulator. Refer to sk116366. |
| 02485155 | MTA, DLP, UserCheck | E-mails are not passing through the DLP Gateway configured as Mail Transfer Agent (MTA). Refer to sk116469. |
| 02487339 | MTA, Threat Emulation, Threat Extraction, DLP, Anti-Spam | Improved processing of e-mails and attachments when Security Gateway is configured as Mail Transfer Agent (MTA) - improved an internal mechanism that generates random internal IDs for processed e-mails / attachments. This prevents failures to clean attachments by Threat Extraction blade / strip attachments by Threat Emulation blade. |
| Take 221 (06 Mar 2017) | ||
| 02468493 | URL Filtering, HTTPS Inspection | Improved Security Gateway stability when URL Filtering and HTTPS Inspection are enabled after installing Takes 209, 210, 213, or 216 of R77.30 Jumbo Hotfix Accumulator. |
| 02057763, 02059521 | HTTPS Inspection | Added support of SHA384 and SHA512 hash algorithms that are used by some HTTPS sites to sign their certificates. This specific fix (ID 02325804) was reverted in Take 184 (ID 02366619) to resolve the issue of not being able to open some HTTPS web sites in Chrome browser when HTTPS Inspection is enabled after installing Take 172, Take 174, or Take 178 of R77.30 Jumbo Hotfix Accumulator. Refer to sk112672. |
| 02267698, 02465120 | HTTPS Inspection | Some HTTPS sites do not load when HTTPS Inspection is enabled, if TLS 1.2 with ECDHE cipher is used. Refer to sk112954. |
| 02468724 | SecureXL | 21000 appliance with SAM card is not able to boot after installing Take 210, Take 213 or Take 216 of R77.30 Jumbo Hotfix Accumulator. Refer to sk116070. |
| 02071893 | Threat Emulation | New feature in Threat Emulation and Mail Transfer Agent (MTA): Detecting links to malicious files inside e-mails. Refer to sk115313. |
| 02279050 | Threat Emulation | New feature in Threat Emulation: Support for encrypted (password protected) archives - Threat Emulation blade tries to decrypt the protected archive and extract it based on a preconfigured passwords dictionary. Refer to sk112821. |
| 02367623, 02369699 | Threat Emulation | New feature in Mail Transfer Agent (MTA): File Classifier for MTA - MTA will use the same File Classifier that is used by the Threat Emulation blade, and will be able to detect the real type of a file. |
| 02074197 | Threat Emulation | New feature in Mail Transfer Agent (MTA): Ability to configure load balancing / high availability based on the DNS configuration for Mail Transfer Agent (MTA). Refer to sk110369. |
| 02333089 | Threat Emulation | New features in Mail Transfer Agent (MTA): - Improved debug messages for MTA flow. During the debug of in.emaild.mta daemon (per sk60387), postfix " Message-ID" will appear in the $FWDIR/log/emaild.mta.elg file on the Security Gateway to assist in the analysis of the e-mail flow.- Logs will be generated (will appear in SmartLog / SmartView Tracker) by the Security Gateway if e-mails are piling up in the queue, or if there has been a delay in e-mail processing. Refer to sk109699 - Section "Control intervals and thresholds for MTA logs". |
| 02002951 | Threat Emulation | New features in Mail Transfer Agent (MTA): - Postfix was upgraded to version 3.1 New Postfix version includes full protection against "Drown" attack, and serves as a vehicle for other future features, such as LDAP support. - New monitoring utility for Postfix queue - cpqshape. Refer to sk109699 - Section "Troubleshooting" - subsection "Analyze Postfix bottlenecks using the cpqshape utility". |
| 02472626 | Threat Emulation | Security Gateway configured as Mail Transfer Agent (MTA), does not forward e-mails that contain more levels of nested MIME content (attachment inside attachment inside attachment etc.) than configured in the Threat Prevention Profile (Threat Emulation Settings - "Mail (SMTP)" - "Configure...") - such e-mails are discarded due to timeout). |
| 02462393 | Threat Emulation | Improved handling of e-mail attachments with long names. |
| 02466877 | Gaia OS | " Wrong Type (should be Gauge32 or Unsigned32): INTEGER" message in SNMP Response. Refer to sk115119. |
| 01951357, 02388316 | Gaia OS | /var/log/messages file shows the line " sshd[ |
| 01961177, 02388317 | Gaia OS | The "Network Interfaces" page in the Gaia Portal does not load if the text string "NAN" or "inf" is saved in the interface's "Comment" field. |
| 02466343 | Gaia OS, VSX | " Wrong Type (should be INTEGER)" errors when querying SNMP OID 'vsxCountersTable' (.1.3.6.1.4.1.2620.1.16.23.1) on VSX Gateway.Refer to sk109469. |
| 02466231 | VSX | Commands executed in Gaia OS on VSX Gateway are logged in /var/log/messages file without VSID of Virtual Systems. Refer to sk113128. |
| 02465996 | VPN | In certain cases, depending on encryption domain configuration, the "ike_enable_supernet" parameter (refer to sk101219) does not create the correct supernetting pattern - the subnet mask does not correlate to the original subnet mask that was defined by the user. |
| 02450974, 02454119 | SSL Network Extender | " Cannot establish connection to SSL Network Extender gateway. Try to reconnect." error from SNX client on Mac OS X / macOS after disabling both RC4 and 3DES cipher suites on the Mobile Access Gateway. Refer to sk116156. |
| 02331736 | Mobile Access | Occasionally, the Mobile Access Deployment Agent fails to invoke SNX, ESOD Compliance or SecureWorkspace in FireFox browser. " Java unavailable" error message is displayed to the user. |
| 02440490 | Security Management Server, Multi-Domain Security Management Server | " Bad Response format" error in SmartDashboard when enrolling a VPN certificate using SCEP from the external CA based on Windows Server 2008 and higher. Refer to sk106405. |
| Take 216 (17 Feb 2017) - General Availability Take On 21000 appliances with SAM card, this Take should not be installed (refer to sk116070). |
||
| 02447851 | Check Point Appliances | Added support for 3100 and 5100 models. |
| 02449825 | Check Point Appliances | Added support for 5900 model. |
| - | Check Point Appliances | - "VBAT3 Voltage" is shown as "Low" in Gaia Portal on the Hardware Health page on 3200 appliance. - Alert LED is red on 3200 appliance. Refer to sk115575. |
| 02463143 | SecureXL | If Bond or Bridge interfaces are configured on the Security Gateway, then the following cosmetic message is displayed on the screen during boot, or when executing the "cpstart" / "sim affinity" commands:basename: missing operand Try basename -help for more information. |
| Take 213 (05 Feb 2017) On 21000 appliances with SAM card, this Take should not be installed (refer to sk116070). |
||
| 02442459; 02443332; 02442078; 02443892 |
DLP, Threat Extraction | R77.30 Security hotfix for DLP and Threat Extraction blades. Refer to sk115596. |
| 02448398 | Threat Extraction | - Added ability to block corrupted files that could not be emulated - Added ability to block access to original corrupted files that could not be emulated Refer to sk115792. |
| Take 210 (25 Jan 2017) Note: This take replaces Take 209 released on 25 Jan 2017 On 21000 appliances with SAM card, this Take should not be installed (refer to sk116070). |
||
| 02419870 | URL Filtering, HTTPS Inspection | Access to HTTPS sites is intermittent - web site opens only after the user refreshes the page several times when URL Filtering blade and HTTPS Inspection are enabled. Refer to sk115638. |
| 02344419 | Security Gateway | Intermittent access to some web sites because in.ahttpd process constantly consumes CPU at 100% in certain scenarios. Refer to sk106916. |
| 02045637, 02389862 | Security Gateway | Proxy ARP table is not loaded when Bond interface changes MAC address during reboot. Refer to sk111675. |
| 01963489. 02388707 | Security Gateway | The Client Authentication in.ahclientd process crashes with core dump files. |
| 02356285, 02419742 | Security Gateway | H.323 VoIP call drops after exactly one hour because Keep Alive "ACK" packets are not forwarded to the VoIP client. Refer to sk113749. |
| 01873031, 02387645 | Security Gateway | "Via" field in HTTP Request sent to a web server by Security Gateway in Non Transparent proxy mode contains incomplete HTTP version. Refer to sk108900. |
| 01709059 | Security Gateway, Cluster, SecureXL | " Error: bond_3ad_get_active_agg_info failed" in the output of "dmesg" command when using 802.3ad mode.Refer to sk110344. |
| 02368502, 02419738 | SecureXL | In rare cases, Security Gateway with enabled SecureXL crashes during policy installation when SAM card is not installed on 21000 appliance. Refer to sk114153. |
| 02399631, 02441021 | Cluster | " Try to update state to ACTIVE because member is down and state might should be changed" message in /var/log/messages file. Refer to sk115228. |
| 02079428, 02394915 | Cluster, SecureXL | ClusterXL in Load Sharing mode with SAM card installed may restart when an interface is administratively shut down (e.g., with 'ifconfig ethX down' command). |
| 02434403 | CoreXL | - "BUG: soft lockup - CPU#X stuck for 10s! [fw_worker_Z:...]" appears repeatedly in /var/log/messages file- When VLAN interfaces are configured, the /var/log/messages file repeatedly shows: ;FW-1: _fwhamultik_set_mem: changing IF_UNIQUE(i) from X to Y(changed by [fwhaif.c:N]);<br> ;FW-1: _fwhamultik_set_mem: changing IF_UNIQUE(ifn) from Y to X(changed by [fwhaif.c:M]);Refer to sk116870. |
| 02337475 | Anti-Spam | Fixed memory leak in the in.msd process. |
| 02084934, 02344067 | VSX | " SmartView Monitor error has occurred (error code: 2147483647)" pop-up in SmartView Monitor GUI when viewing data from a VSX Gateway / VSX Cluster Member. Refer to sk112154. |
| 01931909, 02420752 | VSX | If there are interfaces on VSX Gateway / VSX Cluster Members, whose name is longer than 11 characters, then the following occurs: - " Illegal routing gateway or interface retrieved from the VSX GW" error when creating a new VSX Gateway / VSX Cluster object. - Result of SNMP Query for OID .1.3.6.1.4.1.2620.1.6.6 ( iso.org.dod.internet.private.enterprises.checkpoint.products.svn.routingTable) does not show those interfaces.Refer to sk109815. |
| 02341399, 02339540 | Mobile Access | Sign out from Mobile Access Portal does not run application that were configured to run at SNX disconnection. |
| 02421847; 02424129 |
Mobile Access | Login page of Apache Guacamole web application is blank when published via Mobile Access using Path Translation. Refer to sk134075. |
| 02395361, 02414919 | Mobile Access | " Error:Request Time-out" message when trying to upload files larger than 5 MB via Outlook Web App (OWA). Refer to sk114695. |
| 02422452 | Identity Awareness | Configuring ADQuery with a non-administrator user without membership in "Server Operators" group. Refer to sk104900. This option will be fully available in future Takes. Relevant note about it will be published. |
| 02422440 | Identity Awareness | Decreased the timeout for WMI query (ADQuery) from 30 min to 5 min. |
| 01817285, 02422448 | Identity Awareness | " Status: At least one DC is currently disconnected" when running "cpstat identityServer -f default" command on Identity Awareness Gateway.Refer to sk107838. |
| 02367904 | Gaia OS | Improved behavior of the routed daemon on cluster members: OSPF Hello packets are now forced to be sent out even when the routed daemon is busy processing the LS Updates, SPF calculation or synchronizing OSPF routes to other cluster member. Refer to sk95968 and sk115117. |
| 02441209 | Gaia OS | In rare cases, the confd process might trigger high CPU load on Check Point appliance (that has LOM card installed), if more than 512 "show asset lom-info" / "show asset all" commands were invoked.Refer to sk115634. |
| 02413967 | Gaia OS | In some configurations (where one of the Power Supply Units is not plugged to a power outlet), the following message might appear in /var/log/messages file:xpand[PID]: [ERR] i2c_smbus_read_byte_data STATUS_WORD 0x2848.Refer to sk112829. |
| 02110490, 02110665 | Gaia OS | The routed daemon crashes in rare scenario, if PIM is configured and machine is rebooted when all network cables are disconnected. Refer to sk112251. |
| 02434509 | VPN | When IKEv2 is used in Site-to-Site VPN tunnel, the "IKE current SAs" value in the output of the "cpstat -f IKE vpn" command is larger than then actual number of IKE SAs in the kernel as seen in the output of the "fw tab -t ikev2_sas -s" command. |
| 02436837 | VPN | VPN Central Gateway drops SIP RTP traffic between the SIP Call Manager and the phone behind VPN Satellite Gateway, where the SIP call was initiated. Refer to sk111839. |
| 02439917 | VPN | In certain scenarios, if the corresponding Certificate Revocation List (CRL) is very long, the vpnd daemon consumes the CPU at 90-100% for several minutes after policy installation. Refer to sk109096. |
| 01877490, 02429368 | SmartEvent, SmartReporter | - " Dev Mode: ON - Syntax error" in SmartEvent / SmartReporter reports when creating reports from SmartEvent Intro GUI client. - SmartEvent / SmartReporter reports are missing full pages. Refer to sk108979. |
| Take 207 (08 Jan 2017) | ||
| 02020740, 02023251 | SecureXL | In rare scenario, Security Gateway with enabled SecureXL crashes during policy installation. Refer to sk111411. |
| 01952431, 02420157 | VPN | IKEv2 fails repeatedly with " Message::addPayload: Too many payloads" error in the debug of the vpnd daemon. Refer to sk110156. |
| 01933566, 02420155 | VPN | Improved stability of the vpnd daemon when handling Visitor Mode traffic. |
| 01877586, 02420570 | SmartReporter | SmartReporter PDF reports are displayed in landscape view, and the tables are not displayed in proportion to the page layout. Refer to sk104840. |
| 02387947; 01835442 |
Security Gateway | Issues related to Suspicious Activity Module (SAM) rules: - SAM rules do not survive reboot, and therefore SAM policy is not enforced. - Policy installation after rebooting the Security Gateway fails in SmartDashboard with: Error Reason: Load on Module Failed - Failed to Load Security Policy- Fetching the policy on Security Gateway under debug shows: fw_sam_recover_state: failed to read XXX entries- Attempt to reviewing the SAM kernel table with fails: # fw tab -t sam_requests -s<br> Cannot read the formats structure from localhost: No such file or directoryRefer to sk101368. |
| 02364390 | Mobile Access | Check Point response to CVE-2016-2183 (Sweet32). Added the fix for Mobile Access curl - for SSL connections from Mobile Access Gateway to internal servers. Refer to sk113114. |
| 02421829 | Mobile Access | Issue publishing in Mobile Access a web application that uses WebSocket. |
| 01949612 | Mobile Access | When using Mobile Access blade, error occurs in web application as a result of an incorrect HTTP code from destination web server. Refer to sk109040. |
| 02418422 | Check Point appliances | Updated the "sysObjectID" for 3200 / 5000 / 15000 / 23000 / Sandblast Threat Emulation TE100X, TE250X, TE1000X, TE2000X appliances in the chkpnt.mib file.Refer to sk90470. |
| Take 206 (26 Dec 2016) | ||
| 02359254, 02412348 | Security Gateway, Security Management Server, Multi-Domain Security Management Server | In rare scenarios, the fwd process or fw_full process on Security Gateway consumes memory at high level and crashes with core dump file. Refer to sk113736. |
| 02329308, 02386581 | Security Gateway | In rare scenarios, Security Gateway crashes with kernel panic when connecting to web sites that prefer AES GCM (Galois Counter Mode) cipher. Refer to sk113873. |
| 02407215 | URL Filtering, Application Control, HTTPS Inspection | Some web sites do not load completely when connecting through Check Point Security Gateway configured as Proxy in Non-Transparent Mode. Refer to sk114736. |
| 02295419, 02397150 | Mobile Access | SSO Kerberos Authentication is not triggered in Mobile Access Web Application when 'SPNegoTokenRequested' header is being sent by the internal Web Server. Refer to sk114555. |
| 02334659 | SecureXL | Improved stability of SAM card. |
| 02420705 | Security Gateway | " sip reason: Too many streams in SDP" drop log in SmartView Tracker when passing VoIP SIP SDP messages that exceed 4 streams. Refer to sk93752. |
| 02400714 | vSEC Virtual Edition | vSEC Virtual Edition (running on Linux KVM) might hang during its boot under heavy traffic load. |
| 02390872 | vSEC Virtual Edition | vSEC Virtual Edition (running on Linux KVM) exhibits low network performance when working with Virtio network configuration (issues with virtio_net driver). |
| 02397378 | vSEC Virtual Edition | vSEC Virtual Edition (running on Linux KVM) is not able to configure SecureXL SIM Affinity for Virtio interfaces. |
| 02404454 | vSEC Virtual Edition | vSEC Virtual Edition does not support SR-IOV for following Intel network adapters: 82599, x540, x550 (issues with ixgbevf driver). |
| 02402663 | SmartReporter, SmartEvent | The 'evs_backup' command sometimes fails with " Failed to start postgres service" due to long database startup duration.Refer to sk104839. |
| Take 205 (15 Dec 2016) - General Availability Take | ||
| 02390116 | Check Point Appliances | /var/log/messages file might show the following on 23500 appliance:xpand[PID]: [ERR] i2c_smbus_read_block_data failed <X>SNMP Trap for Power Failure / PSU Failure might be sent at the same time. |
| 02413912 | HTTPS Inspection | The wstlsd daemon might crash. |
| 02405257 | Threat Extraction | " An error has occurred while extracting file" message in Threat Extraction log when processing an attached image file. Refer to sk115107. |
| 02357493 | Security Gateway, Threat Emulation | Firewall-1 information is not restored from a Gaia OS backup file when Threat Emulation is enabled. Refer to sk113594. |
| Take 198 (23 Nov 2016) | ||
| - | Check Point Appliances | Support for the new improved R77.30 Gaia image (released 16 Dec 2016) for 3200 / 5000 / 15000 / 23000 / TE100X / TE250X / TE1000X / TE2000X appliances. |
| - | Threat Extraction | Threat Extraction image cleaning and other enhancements hotfix. Stability and quality fixes resolving issues, as well as new features on Threat Extraction products. Refer to sk114613. |
| 02005542 | Threat Extraction | Ability to add support for new file types in Threat Extraction. Refer to sk112240. |
| 02387864 | All | Check Point response to CVE-2016-5195 (Dirty Cow). Refer to sk114161. |
| 02297576 | SmartLog | Issues with SmartLog GUI in Multi-Domain environment with multiple Domain Log Servers: - " Server is disconnected!" message for connected clients- SmartLog GUI fails to open; Sometimes, it loads to 35%, an then displays a message that SmartLog is unreachable Running the smartlogstop;smartlogstart commands resolves the issue only temporarily. |
| 01984127, 01984392 | SmartLog | SmartLog GUI of Global SmartLog does not sort the logs by time when running a query. Refer to sk112826. |
| 01935060, 01936585 | SmartLog | In some records, the Origin field in SmartLog is displayed with 0.0.0.x format. Refer to sk109820. |
| 01910154, 02386501 | SmartLog | The smartlog process crashes occasionally on R77.30 Log Server that runs SmartLog. Refer to sk114417. |
| 01725423, 01725724 | SmartLog | SmartLog GUI freezes occasionally, and it is not possible to log in to SmartLog GUI again. Refer to sk107153. |
| 01710875, 01711097 | SmartLog | After upgrade to R77.30, SmartLog becomes non-responsive. The " smartlog_server" process consumes CPU at 100%.Refer to sk106782. |
| 01702895, 01703025 | SmartLog, Multi-Domain Security Management Server | Global SmartLog R77.30 does not show logs from remote Multi-Domain Server. Refer to sk106600. |
| 01864909, 01865057 | SmartLog, Multi-Domain Security Management Server | "User" column in Global SmartLog GUI shows asterisks "******" instead of "User@Domain". Refer to sk108771. |
| 02387363 | Mobile Access | Mobile Access Web Form SSO login fails if the password contains special characters (e.g., exclamation sign "!", asterisk "*", plus "+", minus "-", etc.). Refer to sk114458. |
| 01982715, 02385180 | Mobile Access, VSX | SNX packages are not updated on VSX Gateway in the contexts of Virtual Systems during the installation of R77.30 Jumbo Hotfix Accumulator. Refer to sk114624. |
| 01939363 | SecureXL | " sim dropcfg -l" command incorrectly shows " Enforced on external interfaces only". Refer to sk109960. |
| 02358210, 02364750 | Cluster | VRRP Backup member on Gaia OS sends BGP traffic to BGP peers. Refer to sk114265. |
| 02079535 | Cluster | Dynamic Routing routes are not synchronized during Connectivity Upgrade (CU), which causes outage during the CU fail-over. Refer to sk107042 - section "(3) Upgrade paths with Dynamic Routing synchronization". |
| 01961260, 02381185 | Cluster, CoreXL | Traffic between ClusterXL members is dropped randomly. Refer to sk110312. |
| 02367867, 02369381 | Cluster, Gaia OS | Improved stability of the routed daemon on Standby cluster member. |
| 02367871, 02369379 | Cluster, Gaia OS | Improved behavior of the routed daemon on cluster members: Wait at least 15 seconds after the routes are synchronized between cluster members to bring the Critical Device "routed" back to the "up" state. This gives the routed daemon enough time to run the SPF calculation and push OSPF routes down to the kernel. |
| 01995709, 01996404 | CoreXL | The " fw -i Refer to sk110881. |
| 01852502, 02388218 | CoreXL | Session Authentication fails for all connections when CoreXL is enabled on Security Gateway. Refer to sk109838. |
| 02361143 | Appliances | Multi-Queue does not work on 3200 / 5000 / 15000 / 23000 appliances when it is enabled for on-board interfaces. Refer to sk114625. |
| 02333130; 02382905 |
VPN | Traffic over VPN tunnel does not pass for several seconds during policy installation on Security Gateway (which causes traffic loss). Refer to sk55244. |
| Take 189 (07 Nov 2016) | ||
| 01961629, 01965728 | Gaia OS | All OSPF routes are lost after configuring "Add redistribution from Aggregate" in Gaia Portal. Refer to sk110337. |
| 02355536 | Gaia OS | - mail daemon writes its logs to the /var/log/messages file although the "mail.none" directive was added to the /etc/syslog.conf file.- cron daemon writes its logs to the /var/log/messages file although the " cron.none" directive was added to the /etc/syslog.conf file. |
| 02325549 | VPN | When using AES-128 with SHA256, negotiation succeeds, but VPN tunnel fails. Refer to sk111132. |
| 02364953 | VPN | Site-to-Site VPN with 3rd party DAIP Gateway fails with "no proposal chosen" error. Refer to sk114834 (Scenario 1). |
| 02008783, 02351118 | Cluster | Cluster member with highest priority is not able to become new Active after changing the Members' Priorities. Refer to sk110999. |
| 02351092 | Cluster | Only lowest VLAN is monitored on Bond interface, instead of lowest and highest. Refer to sk106776. |
| 02273695, 02366138 | SecureXL | Improved stability of SAM card when processing the handled notification for a connection that was created from a template in SAM card. |
| 02366189 | SecureXL | DHCP Relay / DHCP Server stops working on ClusterXL with enabled VMAC mode installing Takes 128, 138, 143, 145 of R77.30 Jumbo Hotfix Accumulator. Refer to sk111588. |
| 02057286, 02366103 | SecureXL, Cluster | Cluster member might crash when processing a NAT connection, if SecureXL is not enabled on all cluster members. Refer to sk111888. |
| 01916191, 01932799 | Identity Awareness | If an access role is set to have identified machines, it will sometimes disappear from sessions (refer to the output of "pdp m a" command) that have user and machine sessions. As a result, users can lose access to resources.Issue is most likely to occur when using access role with identified machines in policy and working with sessions with both user and machine. |
| 02350625, 01941785 | Threat Emulation | SmartView Tracker / SmartLog does not show all e-mail recipients when an e-mail is received through the Mail Transfer Agent (MTA). Refer to sk114416. |
| 02380610 | Threat Emulation | Fixed Mail Transfer Agent (MTA) protection bypass. Refer to sk114664. |
| 02366239 | Application Control | Memory leak on loaded Security Gateway with UserCheck rules in the policy. Refer to sk110362. |
| 02370708 | SmartEvent | "ERROR: duplicate key value violates unique constraint "seam_event_XXX_pkey"" in $RTDIR/log/cpsemd.elg file.Refer to sk105185. |
| 02135303, 02364625 | Multi-Domain Security Management Server | Global Policy assign fails with "There is already local object with the name: <Name> among the Domain Management Server's objects" error.Refer to sk112342. |
| Take 185 (20 Oct 2016) - General Availability Take | ||
| 02332164, 02350096 | Data Center Security Appliances | Hardware Sensors on 15000 and 23000 appliances show zero (0) values after completing the Gaia OS First Time Configuration Wizard. Refer to sk112829. |
| 01960960, 02342230 | Security Management Server, Multi-Domain Security Management Server | The fwm process crashes after the size of $FWDIR/tmp/fwmtrace.log file reaches 2GB limit. Refer to sk105579. |
| 01820334, 02364974 | Security Gateway | Security Gateway might crash after running 'cpstop' command if MSS Adjustment (Clamping) for IPsec VPN traffic is enabled ( fw_clamp_vpn_mss=1). Refer to sk101219. |
| 01912515, 02364959 | SecureXL | Connections are broken for short time after disabling SecureXL, or after installing a policy. Refer to sk109468. |
| Take 184 (13 Oct 2016) | ||
| 02366619 | HTTPS Inspection | Removed support of SHA384 and SHA512 hash algorithms (that was integrated in Take 172 as ID 02325804) that are used by some HTTPS sites to sign their certificates. Refer to sk112672. |
| 02352496 | Check Point Appliances | Check Point Appliance might freeze and not reboot in the following scenario: 1. Threat Emulation blade is enabled 2. KVM is enabled 3. Kernel crash / panic occurs ( kdump or kdb) |
| 02359428 | VoIP | VoIP data on non-encrypted connection is dropped with " Failed to initialize data connection paramters" log. |
| 02339267 | Gaia OS | Some eBGP routes are advertised with the source IP address of BGP peer as the next-hop, instead of the next-hop configured in routemap. Refer to sk112834. |
| 02361295 | Gaia OS | Routes get stuck in the OSPF database even though they were deleted from Linux kernel (issue might mostly occur for RIM routes not being removed when a VPN tunnel is dropped). |
| 01996800, 02356078 | Gaia OS | The routed daemon might crash when working with PIM Sparse Mode. |
| 02070300 | Gaia OS | " getaddrinfo: "::1" invalid host address" message appears repeatedly in the /var/log/messages file after enabling NTP while IPv6 is disabled. |
| 01818839, 02336244 | VPN | Randomly, new VPN tunnels are not being established with the peers. Randomly, traffic is not passing over multiple VPN tunnels. Refer to sk113837. |
| 02325549 | VPN | Security Gateway / Cluster member might crash / go into kernel panic during policy installation if using AES encryption and AES-NI is enabled. |
| 02351733 | VPN | IPsec SAs are deleted when value of configuration parameter ike_keep_child_sa_interop_devices is set to " true".Refer to sk105860 (Scenario 4). |
| 02336379 | Security Management Server, Multi-Domain Security Management Server | User is not able to re-connect with any SmartConsole application to Security Management Server. Refer to sk105860. |
| 02340121 | Security Management Server, Multi-Domain Security Management Server | " Bridge uses two different VLAN tags for interfaces. This configuration cannot be used with Active-Active bridge mode" error when creating a Virtual System in Bridge mode. Refer to sk107972. |
| 01993128, 01994944 | Security Management Server, Multi-Domain Security Management Server | Users are deleted after installation of R77.30 Management Add-on. Refer to sk110887. |
| 02013718, 02015361 | Security Management Server, Multi-Domain Security Management Server | "Where used" does not show results while logged into Log Server with SmartDashboard. Refer to sk111077. |
| 02340062 | Multi-Domain Security Management Server | Global Policy assignment problem after failing IPS update. Refer to sk110498. |
| 02337143 | Threat Emulation | Improved Mail Transfer Agent (MTA) ability to insert a text-only disclaimer into e-mails that have no body. |
| 01825619, 01962131 | Security Gateway, Cluster, VSX | Security Gateway / Virtual System might crash due to double record of a connection in Connections Table. Refer to sk110476. |
| Take 178 (29 Sep 2016) | ||
| This specific Take package was recalled for additional testing. Users who have already installed this specific Take, should install either Take 184, or a hotfix from sk112672. |
||
| 02349820 | Threat Emulation | Added support for SHA-256 based certificates for Threat Emulation Engine self-update. Refer to sk113333 and sk103839. |
| Take 174 (22 Sep 2016) | ||
| This specific Take package was recalled for additional testing. Users who have already installed this specific Take, should install either Take 184, or a hotfix from sk112672. |
||
| 02346611 | HTTPS Inspection, Mobile Access, Mobile Access Portal, Identity Awareness Portal, ICA Portal, SmartManagement Portal, SecurePlatform WebUI | Check Point response to CVE-2016-2183 (Sweet32). Refer to sk113114. |
| 02348603 | Security Gateway | Security Gateway might crash if a connection that was closed, but was not yet deleted from the Connections table is reused. |
| 02331952, 02331960 | Cluster | " Warning! No active machines were found" message in /var/log/messages file on ClusterXL Load Sharing Unicast members. Refer to sk105063. |
| 01989782 | Gaia OS | Routes redistributed by Gaia OS to BGP peer are sent without BGP community value. Refer to sk110563. |
| Take 172 (01 Sep 2016) | ||
| This specific Take package was recalled for additional testing. Users who have already installed this specific Take, should install either Take 184, or a hotfix from sk112672. |
||
| 02325804 | HTTPS Inspection | Added support of SHA384 and SHA512 hash algorithms to resolve a failure accessing some HTTPS sites if the site's certificate is signed with SHA384 / SHA512 hash algorithm. Important Note: This specific fix was reverted in Take 184. Refer to sk112672. |
| 01817004, 02158447; 01891486, 02158426; 01817044, 02279342 |
IPS, URL Filtering, Application Control | Security Gateway becomes unresponsive and memory consumption increases when HTTP traffic passes through. Refer to sk109801. |
| 02103280 | Security Gateway | Check Point Response to Logjam Vulnerability CVE-2015-4000. Refer to sk106147. |
| 02336294 | Security Gateway | The cpd process crashes on Security Gateway during Anti-Virus update, when both Primary and Secondary Management Servers are not accessible from the Security Gateway. Refer to sk110684. |
| 02049960 | DLP, Threat Emulation | Added ability to monitor the Postfix process by WatchDog. Refer to sk111783. |
| 02194784 | Gaia OS | Improved handling of a scenario where VRRP cluster members are communicating with two OSPF neighbors advertising the same routes, where one OSPF neighbor has a lower metric than the other: When the OSPF neighbor with lower metric goes down, OSPF routes are re-installed on the VRRP Master member with the new nexthop. However, when the OSPF routes with the new nexthop are synchronized to the VRRP Backup member, instead of deleting the old nexthop and installing the new one, the VRRP Backup member just adds the new nexthop. Output of Expert command " route -n" shows an OSPF route to a destination with two separate nexthops, which is incorrect.Output of Clish command " show route" shows the correct single nexthop. |
| 02054453 | Gaia OS | "Performance Optimization" page in Gaia Portal is either stuck at "Please wait a few moments while the data is loaded..." pop up, or freezes when applying changes to CoreXL or Multi-Queue configuration on 15000 / 23000 appliances.Refer to sk112897. |
| 02209721 | CoreXL | Although CoreXL Affinity was configured to assign only a specific process to certain CPU cores, some interfaces are still being assigned to those CPU cores. Refer to sk110940. |
| 02296180 | CoreXL | Session Authentication fails for all connections when CoreXL is enabled on Security Gateway. Refer to sk109838. |
| 01863108; 02220278 |
CoreXL, SecureXL | After upgrading a Security Gateway with enabled CoreXL on machine with 2 CPU cores (i.e., each CPU runs a CoreXL FW instance and as SND) to R77.30, only CPU0 is handling IRQs, and CPU1 is not handling any IRQs - all interfaces are affined only to CPU0 (i.e., each CPU runs a CoreXL FW instance, but only one CPU runs as SND). Refer to sk110422. |
| 02290247 | IPS | When transferring a large file via FTP, fw_worker process consumes 100% CPU. Refer to sk105411. |
| 02334185 | Application Control | When Security Gateway configured as proxy, Skype is blocked by Application Control. Refer to sk113124. |
| 01669385 | Threat Emulation, Anti-Spam | Improved stability of in.emaild.mta process and mdq process. |
| 02182146, 02327167 | SecureXL | Improved stability of SAM card. |
| 02113430, 02327965 | SecureXL | Improved stability of SAM card when processing a mix of multicast and unicast traffic. |
| 02162414, 02328150 | SecureXL | Improved stability of SAM card when processing multicast traffic. |
| 02164796, 02328938 | SecureXL | Improved stability of SAM card when processing multicast traffic. |
| 02171440, 02329106 | SecureXL | Improved stability of SAM card when processing multicast traffic. |
| 02114009, 02328096 | SecureXL | Improved stability of SAM card when connections are deleted from the Connections Table. |
| 02135463, 02329152 | SecureXL | Improved stability of SAM card when running the tcpdump utility. |
| 02164746, 02329227 | SecureXL | Improved stability of SAM card under large amount of traffic. |
| 02326054, 02326630 | VPN | The vpnd daemon might crash when running under debug (per sk89940) and SNX user connects and authenticates on Security Gateway. |
| 02337360 | VPN | Improved Security Gateway stability. |
| 01888621, 02221764 | Cluster | NAT rule installed on cluster does not hide the Source IP address behind the Cluster VIP address if the packet is sent to Cluster VIP address. Refer to sk113163. |
| 01971837, 02290543 | Security Management Server, Multi-Domain Security Management Server | "Gaia OS Best Practices" on the Compliance tab of SmartDashboard shows status "N/A" for clusters. Refer to sk110474. |
| 01940333, 02332728 | VPN, Security Management Server, Multi-Domain Security Management Server | " Warning: on gw 'Name_of_Security_Gateway', for the range (127.0.0.1, 127.0.0.1), peers were found in communities 'Name_of_Community_1' and 'Name_of_Community_2', peers from the second community will be ignored" during policy installation. Refer to sk110562. |
| 02257309 | Multi-Domain Security Management Server | SmartUpdate in MDS level shows different licensing information than SmartUpdate in Domain level. Refer to sk98898. |
| Take 171 (25 Aug 2016) | ||
| - | Mobile Access | Stability enhancement for Windows 10 support. |
| Take 165 (08 Aug 2016) | ||
| - | Enterprise Appliances | Added support for 5000 appliances. Refer to sk110053. |
| - | Small and Medium Business Appliances | Added support for 3200 appliances. Refer to sk110052. |
| 01951006, 02152601 | Small and Medium Business Appliances, Enterprise Appliances | "Factory" button on the front panel is now functioning on 3200 and 5200/5400/5600 appliances. |
| 02158983; 02159087; 02159457 |
HTTPS Inspection | Added support for ECDH p-384 elliptic curve (to resolve an issue with specific HTTPS sites that use ECDHE ciphers not being accessible when HTTPS Inspection is enabled). Refer to sk110883. |
| 02009223 | SecureXL | Improved performance on Security Gateway configured in Monitor Mode (Mirror Port mode) per sk101670. Refer to sk112798. |
| 01957968 | Cluster | Previously reachable BGP routes are still advertised to BGP peers on ClusterXL after switch that connects these members goes down. |
| Take 164 (01 Aug 2016) | ||
| 02173793 | Mobile Access, VSX | Mobile Access Portal on VSX Gateway is unresponsive with "HTTP 500" error after installing takes between Take_143 and Take_162 of R77.30 Jumbo Hotfix Accumulator because $CVPNDIR/template/phpincs/php-ews/ExchangeWebServices.php file is not copied to the contexts of Virtual Systems. Refer to sk111677 (Scenario 2). |
| 01712179 | Security Gateway | ISP Redundancy in Load Sharing mode is disabled when Non-Transparent Proxy is defined. Refer to sk111678. |
| 02167277 | Application Control | Improved stability. |
| Take 162 (20 July 2016) | ||
| 02159332 | Data Center Security Appliances | Added support for 40 GbE fiber cards on 15000 / 23000 appliances. Refer to sk112517. |
| 02150866 | Security Management Server, Multi-Domain Security Management Server | The cpd daemon might crash when working in SmartProvisioning GUI with ROBO Gateways (e.g., when clicking on "Get Actual Settings"). |
| 02151317 | Security Management Server, Multi-Domain Security Management Server | " Communication has been aborted by the peer" error in SmartDashboard connected to Active Security Management Server / Domain Management Server in High Availability mode, after the state was changed from Active to Standby for the third time. Issue occurs when the state is changed while the the fwm processes run under debug (per sk86186/ sk33207) on both Primary and Secondary Security Management Server / Domain Management Server. |
| 02082365 | Security Management Server, Multi-Domain Security Management Server | Pushing VSX configuration fails with " Internal Error - Failed to commit changes in the OS". Refer to sk103844. |
| 02103175 | Security Management Server, Multi-Domain Security Management Server | Memory leak in the cpd daemon when thresholds are enabled with " threshold_config" command. Refer to sk111880. |
| 02103182 | Security Management Server, Multi-Domain Security Management Server | Memory leak in the cpd daemon (in licutil) causes the daemon to crash (due to exhaustion of available memory). |
| 01911675, 02103172 | Security Management Server, Multi-Domain Security Management Server | Memory leak in the cpd daemon (in cpmon) causes the daemon to crash (due to exhaustion of available memory). |
| 02098132 | Security Management Server, Multi-Domain Security Management Server | In Management HA environment, the fwm daemon might crash during an attempt to delete Security Gateway / Cluster object in SmartDashboard. Refer to sk110748. |
| 02151722 | Multi-Domain Security Management Server | The fwm daemon on MDS server might randomly crash during assignment of Global Policy. |
| 02150810 | Multi-Domain Security Management Server | Assignment of Global Policy might fail randomly with " Failed to open connection with Domain Management Server or connection with Domain Management Server ended unexpectedly" error message. |
| 02150773 | Multi-Domain Security Management Server | Removal of Global Policy with IPS might fail with: error: Failed to (delete) object ( Error received: (Object References Deletion Failed - Failed to remove references of object error: Disconnected from Domain Management Server. Check Domain Management Server status. Operation failed. in the following scenario: 1. Domain Management Server is subscribed to Global Policy with IPS 2. Compliance blade is enabled on Domain Management Server Alternatively, removal of Global Policy with IPS might end successfully, but the global IPS profile is not removed. |
| 02150871 | Multi-Domain Security Management Server | Assignment of Global Policy might freeze randomly because the fwm mds fwmconnect proccess hangs. |
| 02150774 | Multi-Domain Security Management Server | Assignment of Global Policy might fail randomly, and core dump files for the fwm process are generated (with size of 2 GB) after running mdsstop ; mdsstart commands. |
| 02071813 | VPN | IPSec instability with IKEv2. Refer to sk112160. |
| 01961523 | VPN | Traffic over VPN tunnel does not pass for several seconds during policy installation on Security Gateway (which causes traffic loss). Refer to sk55244. |
| 02151898; 01959895, 01987676 | VSX | Virtual Systems are "Down" after reboot of VSX Cluster Member. Refer to sk110073. |
| 02024874 | Gaia OS | Apache HTTP server daemon (httpd) crashes with core dump file during shutdown of Gaia OS. |
| Take 161 (14 July 2016) | ||
| 02043721 | Anti-Virus | " cmi_execute_ex: cmik_loader_fw_context_match_cb(context_apps=1000 buf_len=14) failed;" message appears repeatedly in /var/log/messages file on Security Gateway. |
| 02066100 | Identity Awareness | Machine sessions that are used by various users receive an incorrect large session timeout (TTL is set to one week from the discovery time). |
| 02071227 | Identity Awareness | Identity Awareness Gateway might crash when running ' cpstop' command. Refer to sk111315. |
| 02077462 | Mobile Access | Kerberos Single Sign On (SSO using Kerberos) for Web Applications might fail from time to time. |
| 02058573 | Mobile Access | Web Applications do not work as expected when accessing Mobile Access Portal with Web Form SSO enabled and the web page contains a form with encoded "+" sign (%2B). |
| 02059445 | Mobile Access | Manual SSO does not work when the password contains special characters such as "%". |
| 02029758 | Threat Emulation | " Maximum delay time" setting for Mail Transfer Agent is not applied if the defined value is greater than 15 minutes. Refer to sk109893. |
| 02039586 | Multi-Domain Security Management Server | Users and GUI clients are overwritten on Security Management Server during MDS synchronization when Domain Management Server and Security Management Server are configured in HA mode. Refer to sk111175. |
| 01904538, 02052848 | HTTPS Inspection | HTTPS Inspection Bypass rules that use Destination IP or Source IP stop working after enabling Probe Bypass. Refer to sk111617. |
| 01819431 | SecureXL | Improved handling of Bond Group IDs greater than 35 when creating bond interface of SAM card ports. |
| 01959704; 02158515 |
Gaia OS | Not able to configure routemap for each BGP peer on Gaia OS. Refer to sk110477. |
| Take 159 (20 June 2016) - General Availability Take | ||
| - | General | Minor improvement in Jumbo Hotfix Accumulator package to support software updates to this Jumbo Hotfix Accumulator. |
| Take 158 (16 June 2016) | ||
| 01621251; 02077494; 01621253 |
Cluster | Gratuitous ARP Request packets (GARP) are not sent during cluster fail-over for IP addresses configured in the $FWDIR/conf/local.arp file (per sk30197), if those IP addresses and Cluster VIP address are on different subnets. Refer to sk105645. |
| 02042497; 01834487, 02006059 |
HTTPS Inspection | Probe Bypass is initiated on non-SSL connection. |
Refer to sk108294.
| Important Note: | For this fix to work correctly, at least this Take_158 must be installed on both sides - on Security Management Server and Security Gateway. Otherwise, HTTPS Inspection Probe Bypass feature will not work at all. |
| Take 156 (30 May 2016) | |
| 02051292 | Gaia OS |
| 02021344 | Gaia OS |
| 02027698; 02027733; 02027775 |
Security Gateway |
| 02029554 | Mobile Access |
| 02051629 | Mobile Access, VSX |
| 02042653 | VPN |
| 02020823; 02020869 |
Threat Extraction |
| 02015157 | Cluster |
| 02045987 | Cluster |
| 01680839, 02006901 | Security Management Server, Multi-Domain Security Management Server |
| Take 155 (26 May 2016) | |
| This specific Take package was recalled for additional testing and was replaced by Take 156. | |
| Take 145 (10 May 2016) | |
| 02010218 | VPN, SecureXL |
| 02022420 | VPN |
| 02017992 | VPN |
| 01998381, 02022414 | HTTPS Inspection |
| 02027270 | Security Management Server, Multi-Domain Security Management Server |
| Take 143 (21 Apr 2016) | |
| 01979082 | Security Management, SmartDomain Manager, Multi-Domain Management / Provider-1 |
| - | 2012 Models Security Appliances, Data Center Security Appliances |
| 02012973 | Mobile Access, Endpoint Security On Demand Secure Workspace (SWS) |
| 01898695 | Mobile Access, Cluster |
| 01807600, 01807879 | Mobile Access |
| 01989333 | Mobile Access |
| 01982148, 01984883 | Mobile Access |
| 01832865, 01834664 | Mobile Access |
| 02019281 | Threat Emulation |
| 02019094 | Threat Emulation |
| 02008306 | Threat Emulation |
| 02013906 | Application Control, URL Filtering |
| 01953147 | Gaia OS |
| 01946518, 01953158 | Gaia OS |
| 01953146 | Gaia OS |
| 01956738, 01957576 | Gaia OS |
| 01990563 | Gaia OS |
| 02004564 | Gaia OS, Cluster |
| 02003221 | Security Gateway |
| 02011289 | Security Gateway, Security Management Server, Multi-Domain Security Management Server |
| 02002926 | Security Management Server, Multi-Domain Security Management Server |
| 01972280 | Security Management Server, Multi-Domain Security Management Server |
| 01834487, 02006059 | HTTPS Inspection |
| 02003519, 02019844 | HTTPS Inspection, CoreXL |
| 01926907, 02005808 | CoreXL |
| 02012536, 02013035 | CoreXL |
| 01925621, 01946714 | SecureXL |
| 01980215, 01961276 | DLP |
| Take 138 (14 Apr 2016) | |
| This specific Take package was recalled for additional testing. | |
| Take 135 (07 Apr 2016) | |
| This specific Take was recalled for additional testing. | |
| Take 128 (31 Mar 2016) | |
| 01685521; 01713626; 01724275; 01782998; 01814720; 01820258; 01821776; 01834453; 01852560 |
Threat Extraction, Threat Emulation |
| 01978917 | Threat Extraction |
| 01915777, 01936336 | Mobile Access |
| 01892929 | Mobile Access |
| 01811956 | Mobile Access, Endpoint Security On Demand (ESOD) Compliance Scanner |
| 01958625, 01959114 | Mobile Access, SSL Network Extender |
| 01978856 | Mobile Access, SSL Network Extender |
| 01726719, 01971151 | Cluster |
| 01975771 | SmartEvent |
| 01974185; 01974187 |
Security Gateway |
| 01980269 | HTTPS Inspection |
| 01947356, 01976641 | IPS |
| 01964380 | VSX |
| 01974230 | DLP |
| 01979887 | Gaia OS |
| 01915798 | SecureXL |
| 01916631 | SecureXL, Cluster |
| Take 117 (10 Mar 2016) | |
| 01960407, 01961587 | Mobile Access |
| 01960012 | Mobile Access, SSL Network Extender |
| 01898695 | Mobile Access, Cluster |
| 01927612 | Security Gateway |
| 01955875 | Security Gateway, Security Management Server, Multi-Domain Security Management Server |
| 01846456, 01960991 | Security Management Server, Multi-Domain Security Management Server |
| 01281728, 01866926 | HTTPS Inspection |
| 01959400 | VPN |
| 01947521 | IPS |
| 01973174 | URL Filtering |
| 01959509 | URL Filtering, Application Control |
| 01948312 | Anti-Virus |
| 01938571, 01967411; 01938659, 01967415; 01938796, 01967423 |
QoS |
| 01915918, 01961123 | Threat Emulation |
| 01963649 | Cluster, CoreXL |
| 01972270 | Gaia OS |
| 01972282 | Gaia OS |
| 01962335 | Gaia OS |
| 01948282; 01948283 |
Gaia OS |
| 01965115 | Gaia OS |
| 01936069 | Gaia OS |
| 01937716, 01937817 | Gaia OS |
| 01963688 | Gaia OS |
| 01719131, 01957088 | SecureXL |
| Take 111 (23 Feb 2016) | |
| - | Gaia OS |
| - | Data Center Security Appliances |
| Take 105 (11 Feb 2016) Important Note: Installation of this specific Take is supported only using Legacy CLI |
|
| 01944440 | Cluster |
| 01932329, 01940409 | Mobile Access |
| 01890990, 01946973 | VSX |
| 01896617 | Threat Emulation |
| 01879709, 01937995 | SmartView Monitor |
| Take 102 (08 Feb 2016) Important Note: Installation of this specific Take is supported only using Legacy CLI |
|
| 01872488, 01916408 | Gaia OS |
| 01940689, 01944426 | Gaia OS |
| 01916400 | Gaia OS |
| 01702790, 01935921 | Gaia OS |
| 01928277 | SecureXL |
| 01900767 | SecureXL |
| 01906737 | SecureXL |
| 01818639 | SecureXL |
| 01886179, 01873994 | HTTPS Inspection, CoreXL |
| 01939568 | SmartView Monitor |
| 01938186 | VPN |
| 01821434 | Mobile Access |
| 01939446 | Anti-Virus, Anti-Bot |
| Take 101 (28 Jan 2016) | |
| 01921776 | Security Gateway, VSX |
| 01697910 | Gaia OS |
| 01917104; 01917106; 01917110 | Gaia OS |
| 01931796 | Gaia OS |
| 01878129 | Gaia OS |
| 01584565 | Gaia OS |
| 01584749 | Gaia OS, Cluster |
| 01929775 | Security Gateway, Security Management Server |
| 01932161 | Application Control, URL Filtering |
| 01931123 | Threat Emulation |
| 01917419 | Application Control, URL Filtering, Anti-Bot, Anti-Virus |
| 01921779 | SecureXL |
| 01901962 | SecureXL |
| 01929294 | Security Gateway, Security Management Server |
| 01925676 | Security Management Server, Multi-Domain Security Management Server |
| 01622993 | Security Management Server, Multi-Domain Security Management Server |
| Take 99 (20 Jan 2016) | |
| 01642962, 01885055 | SecureXL |
| 01892651 | SecureXL |
| Take 98 (17 Jan 2016) | |
| 01910745 | Security Gateway |
| 01914959 | Gaia OS |
| 01844422 | Gaia OS, SecureXL |
| 01844424, 01880511 | SecureXL |
| 01844428, 01882993 | SecureXL |
| 01907475, 01912368 | Application Control, URL Filtering |
| 01917498 | URL Filtering |
| 01896185, 01899771 | Mobile Access |
| 01907197 | LTE |
| 01907262 | LTE |
| Take 95 (04 Jan 2016) | |
| 01883475 | General |
| 01879869, 01822961, 01882245 | Gaia OS |
| 01879870 | Gaia OS |
| 01887289 | Gaia OS |
| 01576432 | Gaia OS |
| 01697615; 01614716 |
Gaia OS |
| 01822237 | Gaia OS |
| 01799658 | Gaia OS |
| 01884462, 01783081 | Gaia OS, Security Gateway, Cluster |
| 01884966 | Cluster, CoreXL |
| 01869737 | Cluster, SecureXL |
| 01878266, 01848272, 01880216, 01855069 | Cluster |
| 01883357 | Security Gateway |
| 01852286, 01852966 | Mobile Access |
| 01898695 | Mobile Access |
| 01907717, 01909788 | Mobile Access |
| 01811956 | Mobile Access, Endpoint Security On Demand Secure Workspace (SWS) |
| 01846041, 01897357; 01861402, 01897362 |
SecureXL, Cluster |
| 01893950, 01893952, 01908788 | SecureXL |
| 01906167 | SecureXL |
| 01870140 | VPN |
| 01879422 | VPN |
| 01691222, 01904577 | VPN |
| 01894511 | Threat Emulation |
| 01664717, 01891039 | Threat Emulation |
| 01909632, 01879389 | Identity Awareness |
| 01707734, 01909020 | IPS |
| 01874752, 01913185 | Application Control |
| 01896491 | URL Filtering, Application Control |
| 01861543, 01884021 | URL Filtering, Application Control |
| 01856214, 01904755 | Anti-Virus |
| 01910660 | Security Management Server, Multi-Domain Security Management Server |
| 01896487 | Multi-Domain Security Management Server |
| 01894840, 01909714 | Multi-Domain Security Management Server |
| Take 84 (06 Dec 2015) | |
| - | Check Point Appliances |
| 01867054 | Gaia OS |
| 01786538, 01866514 | Gaia OS |
| 01842491, 01855837 | Gaia OS |
| 01711169 | Gaia OS |
| 01711135 | Gaia OS |
| 01868833 | Cluster, CoreXL |
| 01877245, 01820037 | Cluster |
| 01803716, 01816518 | SecureXL |
| 01801507, 01754473 | SecureXL |
| 01870777, 01861396 | SecureXL |
| 01848712 | Security Gateway |
| 01875713, 01821877 | Security Gateway |
| 01871427 | Security Gateway |
| 01872347 | Security Gateway VE |
| 01853689 | HTTPS Inspection |
| 01875832 | IPS |
| 01880104, 01830381 | VSX, IPS |
| 01859145 | VSX |
| 01854127 | Mobile Access |
| 01734925, 01854129 | Mobile Access |
| 01802714 | Multi-Domain Security Management Server |
| 01867540 | Multi-Domain Security Management |
| 01867540 | Multi-Domain Security Management |
| 01626339, 01871531 | Security Management Server, Multi-Domain Security Management Server |
| 01732223, 01863656 | Security Management Server |
| 01858483 | Security Management Server |
| 01864379, 01850825 | Security Management Server |
| 01875570, 01827950 | VPN |
| 01749088, 01782611, 01875953 | Anti-Virus |
| Take 75 (12 Nov 2015) | |
| 01848714 | SecureXL |
| 01848202, 01850540 | SecureXL |
| 01845461, 01853546 | SecureXL |
| 01847635 | SecureXL |
| 01820185, 01847696 | Multi-Domain Security Management Server |
| 01857577 | VPN |
| 01831743, 01842525 | Identity Awareness |
| 01811956 | Mobile Access, SSL Network Extender |
| 01850215 | SSL Network Extender |
| 01736812 | Gaia OS |
| 01844830 | Gaia OS |
| 01787201; 01831464; 01827496; 01818312 | Gaia OS |
| 01843846 | Gaia OS |
| 01702566 | Gaia OS |
| 01835145 | Cluster |
| 01834555 | Appliances |
| 01750204, 01842632 | VSX |
| 01730708, 01847073 | HTTPS Inspection |
| Take 67 (29 Oct 2015) | |
| 01829460 | SecureXL |
| 01801032, 01829886 | CoreXL |
| 01751483 | Mobile Access |
| 01815100 | VSX, Mobile Access |
| Take 63 (20 Oct 2015) | |
| 01825587 | VSX |
| 01817941, 01812866 | Security Management Server, Multi-Domain Security Management Server |
| 01823793 | Cluster |
| 01685521 | Anti-Spam |
| 01826612 | Gaia OS |
| 01825932 | Gaia OS |
| Take 61 (30 Sep 2015) | |
| 01752513, 01752529, 01752531 | Security Gateway |
| 01801629, 01811077 | Security Management Server, Multi-Domain Security Management Server |
| 01813036 | SmartEvent |
| 01769402, 01803573 | SecureXL |
| 01814997 | Gaia OS |
| 01817116 | Gaia OS |
| 01820060 | Gaia OS |
| 01693582 | VPN, Mobile Access |
| 01736208, 01817908 | Mobile Access |
| 01808903 | IPS |
| 01802551, 01809183 | CoreXL, VSX |
| 01704012, 01720219 | CoreXL |
| Take 54 (07 Sep 2015) | |
| 01787367 | Security Gateway |
| 01747684 | Gaia OS |
| 01800253 | Gaia OS |
| 01803002 | Gaia OS |
| 01803039 | Gaia OS |
| 01803024 | Gaia OS |
| 01803483 | Gaia OS |
| 01803493; 01803506 | Gaia OS |
| 01717878 | Cluster |
| 01801408, 01699396 | Cluster |
| Take 49 (24 Aug 2015) | |
| 01783813 | VPN |
| 01745911 | Mobile Access |
| 01710533, 01732329 | Mobile Access |
| 01749317 | Gaia OS |
| 01779716 | Gaia OS |
| 01778888 | Gaia OS |
| 01692050, 01709890, 01693135 | Gaia OS |
| 01707909 | HTTPS Inspection |
| 01749545 | VPN |
| 01745741, 01746482, 01780378 | Security Gateway |
| 01718196, 01721499, 01721502, 01782570 | Security Management Server, Multi-Domain Security Management Server |
| 01784203, 01784730, 01784728, 01787564 | Security Management Server, Multi-Domain Security Management Server |
| 01749879 | Security Management Server, Multi-Domain Security Management Server |
| Take 45 (06 Aug 2015) | |
| 01713997 | Gaia OS |
| 01708195, 01708998 | Gaia OS |
| 01727625, 01730966 | VPN |
| 01731020 | VPN |
| 01619868, 01725472 | Security Management Server, Multi-Domain Security Management Server |
| 01732552 | Security Management Server, Multi-Domain Security Management Server |
| 01595501 | Mobile Access |
| Take 43 (27 July 2015) | |
| 01605509 | VPN |
| 01702733 | Mobile Access |
| 01715981 | Gaia OS |
| 01722085 | Anti-Bot, Anti-Virus |
| 01717808, 01647153 | Security Gateway, Cluster |
| 01692246 | Cluster |
| 01705870 | Security Management Server, Multi-Domain Security Management Server, SmartProvioning |
| Take 33 (16 July 2015) | |
| 01703881; 01704019; 01704130; 01704076 | All |
| 01678465, 01709620 | VPN, DLP, Security Management Server, Multi-Domain Security Management Server |
| 01705404 | SecureXL |
| 01710137 | Security Gateway |
| 01709135 | Security Gateway |
| 01711501 | Mobile Access |
| 01695987, 01704522 | Gaia OS |
| 01522914, 01683799 | Security Management Server, Multi-Domain Security Management Server |
| 01710257 | IPS |
| 01697239 | Cluster |
| Take 18 (01 July 2015) | |
| 01594658 | Gaia OS |
| 01681589, 01688680 | SecureXL |
| 01690456 | Mobile Access |
| 01690471 | Mobile Access |
| 01690589 | Mobile Access |
| Take 17 (18 June 2015) | |
| 01685651, 01693669; 01688883, 01694383 | SecureXL, Security Management Server / Multi-Domain Security Management Server |
| 01692710 | Security Gateway |
| 01685214, 01693432 | Anti-Virus |
| 01668422 | Mobile Access, Security Management Server / Multi-Domain Security Management Server |
| 01647109 | Security Management Server, Multi-Domain Security Management Server |
| 01688838 | Security Management Server, Multi-Domain Security Management Server |
| 01568620 | SmartView Monitor, VPN |
| Take 15 (16 June 2015) | |
| 01688001 | Mobile Access |
| 01681471 | Mobile Access |
| 01581791 | SmartReporter |
| 01599078 | SmartReporter |
| 01626310 | SmartView Monitor |
| 01666230 | SmartDashboard |
| 01607383 | Security Gateway |
| 01594559 | Security Gateway |
| 01621272 | Gaia OS |
| 01621251; 01621253 | Cluster |
| 01614571 | Cluster |
| 01596291 | SecureXL |
| 01619159 | VoIP |
| 01607850 | Identity Awareness, Application Control |
| 01605254 | DLP |
| 01692002 | DLP, Threat Emulation |
List of resolved issues in the Ongoing Take
These fixes were added on top of the latest General Availability Take.
Enter the string to filter this table:
| ID | Product | Description |
| Take 351 (02 Jul 2019) CPUSE Identifier: Check_Point_R77_30_JUMBO_HF_1_Bundle_T351_FULL.tgz |
||
| PRJ-2376, PRJ-2358 |
Gaia OS | CVE-2019-11477, CVE-2019-11478 & CVE-2019-11479: TCP SACK PANIC - Linux Kernel vulnerabilities. Refer to sk156192. |
| PRJ-1330, 02541089 |
SecureXL | Resolved issue in multicast routing lookup. |
| PMTR-27365, IDA-1609 |
Identity Awareness | In some scenarios, the Identity Agent fails to authenticate using Kerberos SSO due to very large Kerberos ticket, and the agent fallsback to User/Password authentication. Refer to sk145832. |
| PRJ-366, PMTR-33177 |
Identity Awareness | In some scenarios, when using Load Sharing, upon the same IP address used by two different users, users may be able to access or to be restricted from accessing resources without proper roles. |
| Take 348 (24 Apr 2019) CPUSE Identifier: Check_Point_R77_30_JUMBO_HF_1_Bundle_T348_FULL.tgz |
||
| IDA-1689, PMTR-31034 |
Identity Awareness | Removed unnecessary identity update, during Identity Agent or Terminal Server Agent IP address change, that results in corruption of PEP database. |
| GAIA-3010, PMTR-23157 |
Gaia OS | CVE-2018-15473: Username enumeration is possible due to a premature bail-out while dealing with a malformed packet. The issue exists in several authentication protocols. |
| IDA-1225, PMTR-33364 |
Identity Awareness | Fixed possible session corruption on PDP side that could lead to unexpected behavior. |
| Take 347 (27 Mar 2019) CPUSE Identifier: Check_Point_R77_30_JUMBO_HF_1_Bundle_T347_FULL.tgz |
||
| PMTR-26171, PMTR-26174 |
SSL Inspection | Changed SSL Network Extender on MacOS to 64-bit architecture to support 32 bit apps depreciation in OSX. |
| PMTR-35032, PRJ-99 |
VPN | Important security update for IPSec Site-to-Site (S2S) VPN. |
| Take 346 (13 Feb 2019) CPUSE Identifier: Check_Point_R77_30_JUMBO_HF_1_Bundle_T346_FULL.tgz |
||
| 02468036 | UserCheck | Improved stability when Push Notifications are enabled on Mobile Access blade. |
| 02657434 | VPN | Improved connectivity with 3rd party VPN peers using IKEv2. Refer to sk120835 |
| 02100804 | VPN | After Cluster failover, VPN tunnel is down and "Unknown SPI for IPsec packet" log is shown. Refer to sk112339. |
| PRHF-608 | SecureXL | Improved stability of VSX gateway when under heavy load when SecureXL is enabled. |
| JPMC-284 | SecureXL | Improved stability of SAM card when running multicast jumbo traffic packets. |
| JPMC-316 | SecureXL | Improved stability of SAM card when PIM is configured in Sparse Mode on its interfaces. |
Installation instructions
Important Notes:
- This Jumbo Hotfix Accumulator has to be installed only after successful completion of Gaia First Time Configuration Wizard and reboot.
- Before installing this Jumbo Hotfix Accumulator, back up any configuration file that was edited manually.
List of the most important files (many others exist):
$FWDIR/boot/modules/fwkern.conf$FWDIR/boot/modules/vpnkern.conf$PPKDIR/boot/modules/simkern.conf$PPKDIR/boot/modules/sim_aff.conf$FWDIR/conf/fwaffinity.conf$FWDIR/conf/local.arp$FWDIR/conf/discntd.if$FWDIR/conf/cphaprob.conf$FWDIR/conf/cpha_bond_ls_config.conf$FWDIR/conf/fwauthd.conf$FWDIR/conf/resctrl$FWDIR/conf/vsaffinity_exception.conf$FWDIR/database/qos_policy.C/var/ace/sdconf.rec/var/ace/sdopts.rec/etc/snmp/snmpd.conf/etc/snmp/userDefinedSettings.conf/etc/snmp/vsx-proxy/snmpd.vsx.proxy.conf/etc/snmp/snmpmonitor.conf
- It is not supported to install this Jumbo Hotfix Accumulator using the ISOmorphic Tool.
- In cluster environment:
Jumbo Hotfix Accumulator must be installed on all members of the cluster. To assure synchronization without losing connectivity, cluster administrator should use either Optimal Service Upgrade (OSU) method, or Connectivity Upgrade (CU) method. For additional information and limitations, refer to sk107042 - ClusterXL upgrade methods and paths.
- In Management HA environment:
Jumbo Hotfix Accumulator must be installed on both Management Servers.
- On Multi-Domain Security Management Server:
Note: To check the current Take number, run the "installed_jumbo_take" command.
- When running Take 205 and higher of this Jumbo Hotfix Accumulator:
Higher Take can be installed over the current Take.
- When running Take 198 and lower of this Jumbo Hotfix Accumulator:
Before installing a higher Take, the current Take must be uninstalled (refer to section "Uninstall instructions" - "Show / Hide instructions for uninstall of Jumbo Hotfix Accumulator Take 198 and lower on Multi-Domain Security Management Server").
- On VSX Gateways:
Jumbo Hotfix Accumulator should be installed only using CPUSE in Clish (requires the latest build of CPUSE Agent).
- For Smart-1 405 / 410 appliances:
It is necessary to install Take_266 and higher (refer to sk117578).
- For 15000 / 23000 appliances with 40 GbE cards:
It is necessary to install Take_162 and higher (refer to sk112517).
- On 21000 appliances with SAM card:
Due to specific stability issues, Take 210, Take 213 and Take 216 should not be installed (refer to sk116070).
It is recommended to install Jumbo Hotfix Accumulator on all the R77.30 machines in the environment - Security Gateways / Management Servers / etc. running on Gaia OS.
Installation of a newer Take of Jumbo Hotfix Accumulator on top of the current Take (refer to sk107320):
When running CPUSE Agent build 1127 and higher:
If the previous Take of Jumbo Hotfix Accumulator was installed using Legacy CLI, then the next Take can be installed using the CPUSE.
- If the previous Take of Jumbo Hotfix Accumulator was installed using CPUSE, then all subsequent Takes must also be installed using CPUSE.
- When running CPUSE Agent build 1005 and lower ( users should upgrade to the latest build):
All Takes of Jumbo Hotfix Accumulator must be installed in the same way:
- If the Jumbo Hotfix Accumulator was installed for the first time using CPUSE, then all subsequent Takes must also be installed using CPUSE.
- If the Jumbo Hotfix Accumulator was installed for the first time using Legacy CLI, then all subsequent Takes must also be installed using Legacy CLI.
Procedure:
- Show / Hide instructions for installation in Gaia Portal - using CPUSE (Check Point Update Service Engine)
Note: You can also use the sk111158 - Central Deployment Tool (CDT) to install this Jumbo Hotfix Accumulator on Security Gateways.
For detailed installation instructions, refer to sk92449: CPUSE - Gaia Software Updates (including Gaia Software Updates Agent) - section " (4) How to work with CPUSE".
- Online installation for Latest Ongoing Take
- CPUSE Software Updates Policy should be configured to allow self-update of CPUSE Agent.
Otherwise, users should manually install the latest build of CPUSE Agent from sk92449. 2. Connect to the Gaia Portal on your Check Point machine and navigate to Upgrades (CPUSE) section - click on Status and Actions. 3. In the upper right corner, click on the Add hotfixes from the cloud button in the upper right corner. 4. Paste the CPUSE Identifier and start the search
Note: Contact Check Point Support to get the CPUSE Identifier. 5. When the package is found, click on the link to add the package to the list of available packages. 6. Select the hotfix package - click on More button on the toolbar - click on Verifier (or right-click on the package and click on Verifier). 7. Select the package - click on Install Update button on the toolbar. 8. Machine will be rebooted automatically.
- Online installation for General Availability Take
- CPUSE Software Updates Policy should be configured to allow self-update of CPUSE Agent.
Otherwise, users should manually install the latest build of CPUSE Agent from sk92449. 2. Connect to the Gaia Portal on your Check Point machine and navigate to Upgrades (CPUSE) section - click on Status and Actions. 3. Click on the filter button near the help icon and select All. 4. Select the hotfix package - click on More button on the toolbar - click on Verifier (or right-click on the package and click on Verifier). 5. Select the package - click on Install Update button on the toolbar. 6. Machine will be rebooted automatically.
- Offline installation
Note: Either get the offline package from Check Point Support, or export the package from a source Gaia machine, on which this package was already downloaded / installed (for package export instructions, refer to sk92449 - section " (4-D) "How to ...""). 1. Install the latest build of CPUSE Agent from sk92449. 2. Connect to the Gaia Portal on your Check Point machine and navigate to Upgrades (CPUSE) section - click on Status and Actions. 3. In the upper right corner, click on the Import Package button. 4. In the Import Package window, click on Browse... - select the CPUSE package (either offline TGZ file, or exported TAR file) - click on Import. 5. Select the imported package - click on More button on the toolbar - click on Verifier (or right-click on the package and click on Verifier). 6. Select the imported package - click on Install Update button on the toolbar. 7. Machine will be rebooted automatically.
- Show / Hide instructions for installation in Gaia Clish - using CPUSE (Check Point Update Service Engine)
For detailed installation instructions, refer to sk92449: CPUSE - Gaia Software Updates (including Gaia Software Updates Agent) - section " (4) How to work with CPUSE"
- Online installation for Latest Ongoing Take
- CPUSE Software Updates Policy should be configured to allow self-update of CPUSE Agent.
Otherwise, users should manually install the latest build of CPUSE Agent from sk92449. 02. Connect to command line on Gaia OS. 03. Log in to Clish. 04. Acquire the lock over Gaia configuration database:
HostName:0> lock database override 05. Import the package from Check Point cloud:
HostName:0> installer import cloud
Note: Contact Check Point Support to get the CPUSE Identifier. 06. Show the packages that are available for download:
Note: Refer to the top section " Hotfixes" - refer to " Jumbo Hotfix Accumulator for ..."
HostName:0> show installer packages available-for-download 07. Verify that this package can be installed without conflicts:
HostName:0> installer verify <Package_Number> 08. Download the package from Check Point cloud:
HostName:0> installer download <Package_Number> 09. Install the downloaded package:
HostName:0> installer install <Package_Number>
Note: The progress (in per cent) will be displayed in Clish. 10. Machine will be rebooted automatically.
- Online installation for General Availability Take
- CPUSE Software Updates Policy should be configured to allow self-update of CPUSE Agent.
HostName:0> lock database override 05. Check the available packages:
Note: Refer to the top section " Hotfixes" - refer to " Jumbo Hotfix Accumulator for ..."
HostName:0> show installer packages available-for-download 06. Verify that this package can be installed without conflicts:
HostName:0> installer verify <Package_Number> 07. Download the hotfix package from the Check Point Cloud:
HostName:0> installer download <Package_Number> 08. Show the downloaded packages:
HostName:0> show installer packages downloaded 09. Install the downloaded package:
HostName:0> installer install <Package_Number>
Note: The progress (in per cent) will be displayed in Clish. 10. Machine will be rebooted automatically.
- Offline installation
HostName:0> lock database override 06. Import the package from the hard disk:
Note: When import completes, this package might be deleted from the original location.
HostName:0> installer import local <Full_Path>/<Package_File_Name>.TGZ_or_TAR 07. Show the imported packages:
Note: Refer to the top section " Hotfixes" - refer to " <Package_File_Name>"
HostName:0> show installer packages imported 08. Verify that this package can be installed without conflicts:
HostName:0> installer verify <Package_Number> 09. Install the imported package:
HostName:0> installer install <Package_Number> 10. Machine will be rebooted automatically.
Uninstall instructions
Important Notes:
This Jumbo Hotfix Accumulator removes all its packages during uninstall.
Uninstall of Jumbo Hotfix Accumulator Take (refer to sk107320):
If a Take of Jumbo Hotfix Accumulator was installed using Legacy CLI, then it can be uninstalled using the CPUSE.
- If a Take of Jumbo Hotfix Accumulator was installed using CPUSE, then it must be uninstalled using CPUSE.
- When running CPUSE Agent build 1005 and lower ( users should upgrade to the latest build):
All Takes of Jumbo Hotfix Accumulator must be uninstalled in the same way as they were installed:
- If a Take of Jumbo Hotfix Accumulator was installed using CPUSE, then it must be uninstalled using CPUSE.
- If a Take of Jumbo Hotfix Accumulator was installed using Legacy CLI, then it must be uninstalled using Legacy CLI.
Procedure:
- Show / Hide instructions for uninstall in Gaia Portal - using CPUSE (Check Point Update Service Engine)
- CPUSE Software Updates Policy should be configured to allow self-update of CPUSE Agent.
Otherwise (and if this machine is offline), users should manually install the latest build of CPUSE Agent from sk92449. 2. Connect to the Gaia Portal on your Gaia machine and navigate to the Upgrades (CPUSE) section - click on Status and Actions. 3. Above the list of all software packages, click on the Showing Recommended packages button - select All. 4. Right-click on the Jumbo Hotfix Accumulator package - click on Uninstall. 5. A warning will be displayed that after this uninstall, the machine will be automatically rebooted.
Click on OK to start the uninstall.
- Show / Hide instructions for uninstall in Gaia Clish - using CPUSE (Check Point Update Service Engine)
Otherwise (and if this machine is offline), users should manually install the latest build of CPUSE Agent from sk92449. 2. Connect to command line on Gaia OS. 3. Log in to Clish. 4. Acquire the lock over Gaia configuration database:
HostName:0> lock database override 5. Uninstall the package:
HostName:0> installer uninstall <Package_Number>
Note: The progress (in per cent) will be displayed in Clish. 6. Machine will be rebooted automatically.
- Show / Hide instructions for uninstall of Jumbo Hotfix Accumulator Take 198 and lower on Multi-Domain Security Management Server:
Important Note: When running Take 198 and lower of this Jumbo Hotfix Accumulator, before installing a higher Take, the current Take must be uninstalled.
Otherwise (and if this machine is offline), users should manually install the latest build of CPUSE Agent from sk92449. 2. Uninstall the current Take using CPUSE:
- Connect to the Gaia Portal on your Gaia machine and navigate to the Upgrades (CPUSE) section - click on Status and Actions.
- Above the list of all software packages, click on the Showing Recommended packages button - select All.
- Right-click on the Jumbo Hotfix Accumulator package - click on Uninstall.
- A warning will be displayed that after this uninstall, the machine will be automatically rebooted.
Click on OK to start the uninstall. 3. Remove the references to the "SecurePlatform" package:
- Connect to the command line.
- Log in to Expert mode.
- Remove the references from Check Point Registry:
[Expert@HostName:0]# mdsenv
[Expert@HostName:0]# cp -v $CPDIR/registry/HKLM_registry.data $CPDIR/registry/HKLM_registry.data_BKP
[Expert@HostName:0]# $CPDIR/bin/ckp_regedit -d //SOFTWARE//CheckPoint//SecurePlatform//6.0//HOTFIX_R77_30_JUMBO_HF
[Expert@HostName:0]# $CPDIR/bin/ckp_regedit -d //SOFTWARE//CheckPoint//SecurePlatform//6.0//HotFixes HOTFIX_R77_30_JUMBO_HF 4. Remove the references from crs.xml file:
[Expert@HostName:0]# $CPDIR/bin/CRSValidator -l /opt/SecurePlatform/conf/crs.xml -remove R77_30_JUMBO_HF
List of replaced files
List of files replaced by this Jumbo Hotfix Accumulator can be provided upon request by Check Point Support.
Revision History
Show / Hide revision history
Enter the string to filter this table:
| Date | Description |
| 06 Oct 2019 | - General Availability Take 351 |
| 02 Jul 2019 | - Release of Ongoing take 351 |
| 24 Apr 2019 | - Release of Ongoing take 348 |
| 27 Mar 2019 | - Release of Ongoing take 347 |
| 25 Feb 2019 | - General Availability Take 345 |
| 13 Feb 2019 | - Release of Ongoing take 346 |
| 23 Jan 2019 | - Release of Ongoing take 345 |
| 10 Jan 2019 | - Release of Ongoing Take 344 |
| 26 Dec 2018 | - General Availability Take 342 |
| 17 Dec 2018 | - Release of Ongoing Take 343 |
| 20 Nov 2018 | - Release of Ongoing Take 342 |
| 31 Oct 2018 | - Release of Ongoing Take 339 |
| 16 Oct 2018 | - General Availability Take 338 |
| 20 Sep 2018 | - Release of Ongoing Take 338 |
| 21 Aug 2018 | - Release of Ongoing Take 336 |
| 26 Jul 2018 | - Release of Ongoing Take 331 |
| 10 Jul 2018 | - Release of Ongoing Take 329 |
| 26 Jul 2018 | - Release of Ongoing Take 327 |
| 27 Jun 2018 | - General Availability Take 317 |
| 18 Jun 2018 | - Release of Ongoing Take 322 |
| 11 Jun 2018 | - Release of Ongoing Take 320 |
| 15 May 2018 | - Release of Ongoing Take 317 |
| 26 Apr 2018 | - Release of Ongoing Take 315 |
| 4 Apr 2018 | - Release of Ongoing Take 311 |
| 27 Mar 2018 | - General Availability Take 302 |
| 14 Mar 2018 | - Release of Ongoing Take 310 |
| 26 Feb 2018 | - Release of Ongoing Take 309 |
| 19 Feb 2018 | - Release of Ongoing Take 308 |
| 06 Feb 2018 | - Release of Ongoing Take 302 |
| 16 Jan 2018 | - Release of Ongoing Take 301 |
| 19 Dec 2017 | - General Availability Take 292 |
| 18 Dec 2017 | - Release of Ongoing Take 297 |
| 23 Nov 2017 | - Release of Ongoing Take 294 |
| 08 Nov 2017 | - Release of OngoingTake 292 |
| 24 Oct 2017 | - Release of Ongoing Take 288. |
| 17 Oct 2017 | - Corrected the description of the Issue ID 02351092 in Take 189. |
| 25 Sep 2017 | - General Availability Take 286 is now available in Gaia Portal and Gaia Clish for CPUSE online installation (it replaces General Availability Take_216). |
| 18 Sep 2017 | - Added the CPUSE Identifier for Ongoing Take 286. |
| 13 Sep 2017 | - Release of Ongoing Take 286. |
| 24 Aug 2017 | - Release of Ongoing Take 282. |
| 16 Aug 2017 | - Release of Ongoing Take 280. - Moved Issue ID 02040869 from Take 156 to Take 280. |
| 27 July 2017 | - Improved installation instructions for CPUSE Offline package in Gaia Portal. |
| 26 July 2017 | - Release of Ongoing Take 272. - Added a note that it is not supported to install this Jumbo Hotfix Accumulator using the ISOmorphic Tool. - Added " and reboot" at the end of the note that this Jumbo Hotfix Accumulator has to be installed only after successful completion of Gaia First Time Configuration Wizard. |
| 16 July 2017 | - Added a note that Take 266 is not supported on Cluster High Availability configured in Bridge mode. |
| 04 July 2017 | - Added a note that following the integration of support for TLS 1.2, for Threat Emulation customers that do not allow automatic updates from the Check Point Cloud, it is important to update the Threat Emulation Engine according to sk92509 - Offline updates for Threat Emulation images and engine. |
| 03 July 2017 | - Release of Ongoing Take 266. - Added a note that support for TLS 1.2 was integrated starting in Take_266. |
| 15 May 2017 | - Added the note to back up any configuration file that was edited manually (and added the list of the most important files). |
| 11 May 2017 | - Added a note that this Jumbo Hotfix Accumulator (all its Takes) is not supported on vSEC for Google Cloud Platform. |
| 20 Apr 2017 | - Removed Issue ID 01562489 (that fix was not integrated yet) from Take 33. |
| 09 Apr 2017 | - Added Issue ID 01916631 in Take 128. |
| 30 Mar 2017 | - Updated the description of Issue ID 02002951. |
| 29 Mar 2017 | - Updated the description of Issue ID 02333089. |
| 22 Mar 2017 | - Release of Ongoing Take 225. |
| 06 Mar 2017 | - Release of Ongoing Take 221. |
| 23 Feb 2017 | - Added a note that on 21000 appliances with SAM card, due to specific stability issues, Take 210, Take 213 and Take 216 should not be installed (refer to sk116070). - Improved the description of Issue ID 02441209. - Improved the description of Issue ID 02413967. - Improved the description of Issue ID 02079428. - Improved the description of Issue ID 01931909. - Changed the description of Issue ID 02422452 to say: "This option will be fully available in future Takes". |
| 22 Feb 2017 | - Added sk115575 in Take 216. |
| 17 Feb 2017 | - General Availability Take 216 is now available in Gaia Portal and Gaia Clish for CPUSE online installation (it replaces General Availability Take_205). - Some changes in the design of this article, e.g., separated the "List of resolved issues per Take" section into these sections: - "List of resolved issues in the General Availability Takes". - "List of resolved issues in the Ongoing Take". . |
| 05 Feb 2017 | - Release of Ongoing Take 213. - Added sk114613 in Take 198. - Added sk112240 in Take 198. |
| 29 Jan 2017 | - Added Issue ID 02364390 in Take 207. |
| 25 Jan 2017 | - Release of Ongoing Take 210 (that replaced Take 209). |
| 23 Jan 2017 | - Release of Ongoing Take 209. |
| 08 Jan 2017 | - Release of Ongoing Take 207. |
| 26 Dec 2016 | - Release of Ongoing Take 206. |
| 22 Dec 2016 | - Added relevant notes about the CPUSE Agent. |
| 16 Dec 2016 | - Added notes that R77.30 Jumbo Hotfix Accumulator supports the new improved R77.30 Gaia image (released 16 Dec 2016): - Since Take 198 - new R77.30 Gaia image for 3200 / 5000 / 15000 / 23000 / TE100X / TE250X / TE1000X / TE2000X appliances. - Since Take 84 - new R77.30 Gaia image for 2200 / 4000 / 12000 / 13000 / 21000 / TE250 / TE1000 / TE2000 appliances. . |
| 15 Dec 2016 | - General Availability Take 205 is now available in Gaia Portal and Gaia Clish for CPUSE online installation (it replaces General Availability Take_185). |
| 23 Nov 2016 | - Release of Ongoing Take 198. |
| 17 Nov 2016 | - Updated a note that R77.30 instances running in Microsoft Azure are supported starting in Take 189. |
| 15 Nov 2016 | - Updated a note that R77.30 instances running in Amazon Web Services (AWS) are supported starting in Take 189 (instead on Take 184). |
| 13 Nov 2016 | - General Availability Take 185 is now available in Gaia Portal and Gaia Clish for CPUSE online installation (it replaces General Availability Take_159). |
| 07 Nov 2016 | - Release of Ongoing Take 189. |
| 06 Nov 2016 | - Added a note that this Jumbo Hotfix Accumulator has to be installed only after successful completion of Gaia First Time Configuration Wizard. |
| 20 Oct 2016 | - Release of Ongoing Take 185. |
| 19 Oct 2016 | - Removed instructions for Legacy CLI package (deprecated) - CPUSE should be used instead. |
| 18 Oct 2016 | - Removed a note that until further notice, R77.30 Jumbo Hotfix Accumulator should NOT be installed on Check Point Threat Emulation appliances (TE / TEX series) - no degradation / issue was found. |
| 16 Oct 2016 | - Added a note that until further notice, R77.30 Jumbo Hotfix Accumulator should NOT be installed on Check Point Threat Emulation appliances (TE / TEX series). |
| 13 Oct 2016 | - Release of Ongoing Take 184. |
| 10 Oct 2016 | - Reverted to Ongoing Take 171 The following Take packages were temporarily recalled for additional testing: - Ongoing Take 178. - Ongoing Take 174. - Ongoing Take 172. . |
| 29 Sep 2016 | - Release of Ongoing Take 178. |
| 22 Sep 2016 | - Release of Ongoing Take 174. |
| 01 Sep 2016 | - Release of Ongoing Take 172. |
| 25 Aug 2016 | - Release of Ongoing Take 171. |
| 08 Aug 2016 | - Release of Ongoing Take 165. |
| 01 Aug 2016 | - Release of Ongoing Take 164. |
| 27 July 2016 | - General Availability Take 159 is now available in Gaia Portal and Gaia Clish for CPUSE online installation. |
| 20 July 2016 | - Release of Ongoing Take 162. |
| 14 July 2016 | - Release of Ongoing Take 161. |
| 30 June 2016 | - First release of General Availability Take (Take 159). - Moved all Legacy CLI instructions into a separate section. |
Article Properties
Access LevelGeneral
StatusApproved
Date Created2015-05-21
Last Modified2023-09-11
Was this page helpful?YesNo
Haven't found what you're looking for?
Our customer support team is only a click away and ready to help you 24 hours a day.
reCAPTCHA
Recaptcha requires verification.
protected by reCAPTCHA