Running the 'snmpwalk' command on OID .1.3.6.1.4.1.2620.1.6.23 causes snmpwalk on OID 1.3.6.1.4.1.2620.1.6.7.6.1 to show wrong output

Product Security Gateways
Version R81.20
OS Gaia
Last Modified 2024-11-12

Symptoms

• Running the 'snmpwalk' command on OID .1.3.6.1.4.1.2620.1.6.23 (for example: snmpwalk -v 2c -c public 127.0.0.1 1.3.6.1.4.1.2620.1.6.23), causes snmpwalk on OID 1.3.6.1.4.1.2620.1.6.7.6.1 to show wrong or partial output.
• Restarting the SNMP agent resolves the issue temporarily until you run a new query for OID .1.3.6.1.4.1.2620.1.6.23.

Solution

This problem was fixed. The fix is included in:

• Jumbo Hotfix Accumulator for R81.20 starting from Take 90

If you choose not to upgrade, Check Point can supply a Hotfix. Contact Check Point Support to get a Hotfix for this issue.

A Support Engineer will make sure the Hotfix is compatible with your environment before providing the Hotfix.

For faster resolution and verification, please collect CPinfo files from the Security Management Server and Security Gateways involved in the case.

Hotfix installation instructions:

Refer to sk168597 - How to install a Hotfix.

NOTE

This solution has been verified for the specific scenario, described by the combination of Product, Version and Symptoms. It may not work in other scenarios.

Article Properties

Access Level General
Status Approved by TAC
Date Created 2024-06-17
Last Modified 2024-11-12